Underbody Pics!!!

[DroopyDroors]

I put three on today because i'm waitin for the fourth one to come it got broken during shipping!!!! I love the white and blue look... Tell me what you think!!!!!!

[DroopyDroors]

Another!!

[DroopyDroors]

One more!!!

[ccarr8705]

What kind of camera did you use? i have used 1 disposable and you cant see the lights on the ground and I used my regular film camera and it still sucks. Im getting pissed at this point and I think my lights' transformer is going to shit so I am going to work on that right now.

[DroopyDroors]

i used a shitty kodak digi cam......... But i went to a black parking lot with a little light, because when i take them in a dark place you can't see the car at all...

[VanishingImage]

You install them yourself? If so howd you mount them? Im going to be getting some underbodies and wanna do it myself but have a place hook up the switches and stuff.

[ccarr8705]

Here is where I mounted my switch. The rear light and front lights were almost unhidable bc I wasnt going to cut and move them. The side lights fit right in the groove under the door. The wires you can wire to the front or back. I wired to the front so I was close to the battery. My wiring isnt the best job and the wires arent hidden good. I am going to do way better when I get my fusion underbodies.

droop. where did you hide your front tube? Mine is below where the license plate is so I put two strips of electrical tape to make sure you cant see the light from the front but it still shines on the ground.

[VanishingImage]

thats kool....My friend had some put on his neon and the place that installed his underbodies mounted this switch box under and to the left of the steering wheel column and the switches glow at night when they are turned on and i was thinking about having something like that for mine,just incase i leave them on,i'll know they are cuz the switches light up.They hooked up his interior ones to the box as well(about 4 switches i think)

[Pte Socks]

i put my interior and exterior neon switches in that little alcove to the left of your steering wheel. Basically i proke off the top two clamps and then filed them down so the switches fit in.. it works really well except its kinda a pain to move around becasue its right underneath your dash lights/fog light switch

[DroopyDroors]

My Front and rear are both not at all seen.... if you look up under your front you see a metal piece that is below your radiator you can drill three small holes into it.( for zip ties ) . the back ones had to go way up in the bumber, i drilled holes trough the very back of the trunk to mount them ( any were else in the back would stick out to much)... The only place that i hade to use tape is on the sides in two small spots were they have the cut outs for the jack stands it goes up a little on both sides... My switch is on the side floor piece rite below the emergency release. I have too many swithes so i put that one away from the rest....

[Kdawg207]

what brand/series is that set

[DroopyDroors]

lite glow.... Its the series that are seperate and wire all into one transformer.....

[CuztimGASE1]

Great, clean job man. I got some blue Street Glow's and I had a hard time figuring where I was going to put the front one, and I put it behind the air dam and it looks like shit so I'm changing it to where you have your front tube.

[matts]

i'm wanting to put some neons under my girlfriends car, but i'm gonna wait until after winter. i bought her a big ol' 10" neon for her amp rack tonight. the ONLY place i could find in town that had a blue neon was walmart. everyone else said they had to quit carrying them because dumbasses here in town were putting blue all over their car and driving around with it. and walmart only had 6" 10" and 15". i didn't understand why the 15 was cheapest 10 was next and the 6" was the most expensive :???:

anyways, looks good man. just don't be riding around with them on. that REALLY pisses the cops off :lol:

[DowmaceWH99]

lookin good is that neo-blue? or is it just the blue? for camera settings get as long an exposure as possible! you'll capture alot more light

[magyver]

good place for switches

[Pte Socks]

so true magyver.. mine are in the same alcove but they dont have the custom mount.. instead.. i just broke off some of the clips and installed them there.

[3 DeeJay]

Sweet underbodies!! My switch is hiddin under my dash.. :)

[56chev]

Looks good man.