PDA

View Full Version : wow

MidnightRunner
02-08-2003, 11:33 PM
What all has to be removed to gain access to my thermostat. And is my water pump cam or crank driven?
Nike0302
02-08-2003, 11:41 PM
what?
MidnightRunner
02-08-2003, 11:43 PM
what do you mean what?:???:
Nike0302
02-09-2003, 10:09 AM
well you started a new thread and said thats a lot of info....what are you talking about?
black95ho
02-17-2003, 11:08 PM
best tip is remove your exhuaste mani that give you full acces to the thermostat you will also need to remove the pipe that goes to your radiator. As far as the cooling pump, that is driven by the crank which also runs your cams now you can remove the pump by removing the three screws that hold it togheter. Just be careful not to damage the sprocket the goes to the pump. Right before you put it back use some silicon RTV sealent(gasket) so that you have no leaks. Only reason I recomened it is that I've done this before on my 2.3 which is the same as the 2.4 since it's a 95. Hope this help:cool: