vividkid82
12-15-2003, 10:50 PM
Injectors not squirting on 3.1 V6 auto....any Ideas?
I had to replace an injector..Now when I pulled off the manifold and rail with the injectors still in and cranked the motor over, they all fired(except the bad one). I pulled off the rail and the bad injector and replaced all the o-rings on all the injectors as well as replaced the bad one, but when testing and cranking over to make sure they squirt upon install...none of them do anything. I tested all the injectors(after replacing the bad one) and all read within the correct ohms. I went ahead and put everything back together, but still will not start, just turns over and over.
Update: I put everything back together to make sure maby a sensor didnt come unplugged. Double checked all the fuses. I pulled off the fuel line and stuck it in a jar and when I cranked it over, it just about filled the jar up, so i know the pump is good....im sooo stumpped. Also getting spark.
Any Ideas? I checked all the fuses and connections all seem to be ok...need help asap! Thanks.
I had to replace an injector..Now when I pulled off the manifold and rail with the injectors still in and cranked the motor over, they all fired(except the bad one). I pulled off the rail and the bad injector and replaced all the o-rings on all the injectors as well as replaced the bad one, but when testing and cranking over to make sure they squirt upon install...none of them do anything. I tested all the injectors(after replacing the bad one) and all read within the correct ohms. I went ahead and put everything back together, but still will not start, just turns over and over.
Update: I put everything back together to make sure maby a sensor didnt come unplugged. Double checked all the fuses. I pulled off the fuel line and stuck it in a jar and when I cranked it over, it just about filled the jar up, so i know the pump is good....im sooo stumpped. Also getting spark.
Any Ideas? I checked all the fuses and connections all seem to be ok...need help asap! Thanks.