View Full Version : Re: 3.3L specs
BadBoy
12-16-2003, 11:15 PM
Is that the best everyone can do?! Someone somewhere must know the specs. Anybody have a Chiltons? I myself have been looking for this info, and like everything else with our cars, is like finding a needle in a hay stack :( . If i find anything, I'll post.
HomeDog
12-19-2003, 06:40 AM
dude, didnt you see this (http://www.gaownersclub.com/forum/showthread.php?s=&threadid=18331) thread? it has a bunch of info. but i dono if thats enough for you or not.
BadBoy
12-19-2003, 10:20 PM
thanks homedog, saw that one. i'm looking for things like compression ratio, engine displacement, redline, ect.
i'll keep searching...
92CamaroRS
12-20-2003, 04:35 PM
red line: 5500 rpm
displacement 3.3 Liters or 3300 CC
comp. ratio: 9:1
BadBoy
12-20-2003, 06:52 PM
Thanks 92CamaroRS! i was browsing another thread and came across this link:
http://e-toolbox.com/ads/index.cfm
an absolue wealth of info, u must check it out and pass it along!!!
BadBoy
12-20-2003, 07:11 PM
also 92CamaroRS, do u know what the power band is, aka where the engine is "supposed" to make its power?!
Thanks again- :glasses:
92CamaroRS
12-20-2003, 07:16 PM
160 hp @ aprox. 5100-5200ish
205 ft./lbs @2200ish
BadBoy
12-21-2003, 11:23 PM
thanks again! 160hp, thats it?! :nic: gonna have to do something about that...
might i ask where you got this info from???
92CamaroRS
12-22-2003, 04:06 AM
chiltons and from my own digging.
master
01-29-2004, 12:36 AM
Originally posted by 92CamaroRS
160 hp @ aprox. 5100-5200ish
205 ft./lbs @2200ish
No way. The 3.3 only makes 185 lb-ft of torque.
Sativa
05-25-2004, 11:13 AM
and it makes it at 3k not at 5100. the compression ratio is 8:1 not 9:1
92CamaroRS
05-25-2004, 11:31 AM
Originally posted by master
No way. The 3.3 only makes 185 lb-ft of torque.
thats the 3.1 motor.
92CamaroRS
05-25-2004, 11:32 AM
Originally posted by Sativa
and it makes it at 3k not at 5100. the compression ratio is 8:1 not 9:1
the only motors i know of that make peak HP at 3k rpm is diesels. its peak power is right around 5k. and teh compression ratio is 9:1 looking at my old owners manual it says it in there.
BadBoy
05-25-2004, 01:10 PM
hey all!
from chiltons / hayes:
3.3L - 204ci - 6 cyl - PFI - Buick (if the 8th VIN digit is "N") - 3344cc
160 hp @ 5200
185 tq @ 2000
bore & stroke - 3.70 x 3.16
and fyi:
BadBoy
05-25-2004, 01:12 PM
page 2:
BadBoy
05-25-2004, 01:13 PM
page 3:
BadBoy
05-25-2004, 09:40 PM
o ya, and OBD-I diagnostic codes (if ya didn't have 'em):
vBulletin® v3.7.0, Copyright ©2000-2008, Jelsoft Enterprises Ltd.