View Full Version : I need help finding Euro's.....
DragGrl101
01-27-2004, 09:39 PM
I have been searching the internet for sites to find euro tail lights for my 2000 GT. I can only find them for a Grand Prix, would that fit? If anyone also has a clue how I could find cleared HVAC knobs, that would be great.
matts
01-27-2004, 09:52 PM
look around in this section. you'll find both. even instructions on how to clear the GT lenses....which i think looks better than euros for the GA
30thAnnGAGT
01-27-2004, 09:54 PM
Both mods can be done yourself. If you want further instructions on how to clear your HVAC's or own tails I will be happy to help.
I do not believe there are Altezza tails for the GA ...there's another company that makes one similar, but I cannot remember the name. However the only company that I know of that sells an aftermarket tail light is AED. They run about 500 bucks a pair and do not come with the proper surrounds. Those you have to furnish on your own. There are apparent fit issues with both sets.
Need anything else, just hit the PM button under my post. I'll be happy to help you out
3 DeeJay
01-27-2004, 10:02 PM
AED:
Fully paintable/customizable taillamp assemblies. These come pre-assembled to avoid confusion and are completely plug and play to your stock wiring harness with a factory plug. Can be painted to match your car or just left in the matt black finish! Totally stealth!! These come in two flavors. A standard version inner and outer LED for $465. Or the Killer Bullseye version for $525. The outer turn signal on these have an exploding bubble type LED pattern. Totally original and only available here. So check them out and pick up a set today!
http://66.120.110.5/images/shops/city/products/35100.jpg
99-03 PONTIAC GRAND AM ALTEZZA TAILLIGHTS
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33716&item=2456603711
http://images.andale.com/f2/130/124/10545592/click2enlarge/1074205347331_CWT_CE326CS.jpg
99-03 Stock cleared ones
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33716&item=2455652284
http://i7.ebayimg.com/01/i/01/36/78/36_1.JPG
ccarr8705
01-27-2004, 10:04 PM
www.andysautosport.com has the Euro tails for the GA. Just click PONTIAC 99-03 Grand Am then look for Euro Tail Lights. There are 4 or 5 different patterns for that one. But for euros you might as well clear your GT tail lights, they look real good. Look at my post in Members Rides.
DragGrl101
01-27-2004, 10:06 PM
thanks everyone. I still can't find the thread on the HVAC knobs.
3 DeeJay
01-27-2004, 10:18 PM
Read through this thread and it should help.. http://www.gaownersclub.com/forum/showthread.php?threadid=2656&highlight=HVAC+knobs
DragGrl101
01-27-2004, 10:27 PM
thank you so much DEEJAY. now all ineed is someoe to come out and do it all for me, lol.
3 DeeJay
01-27-2004, 10:32 PM
:lol: You can do it! :P Its not too hard I'm guessing.. I've not done it.. I thought about it though..
matts
01-27-2004, 10:47 PM
i think you mean matte lol. WTF are you? a salesman for AED? :lol:
come on man, you aint gonna go over to illinois and help the pretty lady with her project?? that only like 1 state over
now those cleared stock ones look P-I-M-P. :D. of course those are the same ones i made for my gf's car....so i'm partial lol
3 DeeJay
01-27-2004, 10:57 PM
:lol: I'm no salesman.. I was just posting info.. besides I have aed products on the way :D
ecko70
01-27-2004, 11:34 PM
for the HVACs all i did was boil some water on the stove then place one in at a time for about 45 seconds or so then removed them (be careful dont burn yaself) then i used 2 pair of needle nose and gently pulled back the rubber piece. when it seemed to get too hard to pull anymore i stuck it back in teh water for another 30 or so and just repeated till they came off....took me all of a half hour to do all 3...considering i was watching TV at the time
T3rry
01-28-2004, 01:13 PM
i tried that and i messed it up so bad i had to goto the dealer and get another, was only $8 but i think next tie i'll pick up one from the dealer before hand and try it on that one, if that is sucessful then maybe i would try the other 2, my problem was i tried to use a knife and it came off all uneven and it looke dlike crap, but mayeb i was just too impatient
DragGrl101
01-28-2004, 06:41 PM
good ideas. Ya, know it is only ONE state over......... lol!:D
ccarr8705
01-28-2004, 06:42 PM
Your close why not come to an OHiorides meet. lol
vBulletin® v3.7.5, Copyright ©2000-2009, Jelsoft Enterprises Ltd.