Will These Fit? Please help

[AbsolutGA]

i found these rims on ebay and i wanted to know if they would fit. they say that they are 10 holes, universal 5 holes 5-100/5-114.3. he is telling me they wont fit, but i went on other sites and the measurements they gave me for the size was 114.3. will they fit or no? here is the site.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&category=43957&item=2473373317&sspagename=STRK%3AMEBWA%3AIT

[BoogerBrain]

No, they won't fit.

You'll need a 5-115 bolt pattern.

[AbsolutGA]

how come every time i go online to search for rims it says that 114.3 are the correct bolt pattern?

[99GrandAMSE]

5x114.3 will fit according to most people ...

115mm = 4.527 inches
114.3mm = 4.500 inches

... in other words, the bolt sircle is smaller than factory by less than a 1/32 of an inch on the diameter which you should not have a problem with ... just be certain you torque the wheel properly and in the proper sequence :)

[AbsolutGA]

so i shouldnt have a problem at all?

[99GrandAMSE]

Originally posted by AbsolutGA
so i shouldnt have a problem at all?

Like I mentioned, according to many others the 114.3 will fit :)

[tido_29]

The bolp pattern will fit.

You also need to look at the offset.. I forgot what ours is.

and also the centerbore.

the centerbore is the the size of the circle behind the rim. If you take off your stock rim, you will see that your rim doesnt sit on your stud but actually that little metal lip on the center of your disk breaks or drums.

Our stock centerbore is 70.XX .. the rims i got were 73.0 so i had to get a plastic centric ring to fill in the whole. Unfortunately, you can only get them when you buy the wheels from www.wheelmax.com since they know what size to send you.

[99GrandAMSE]

Originally posted by tido_29
The bolp pattern will fit.

You also need to look at the offset.. I forgot what ours is.

and also the centerbore.

the centerbore is the the size of the circle behind the rim. If you take off your stock rim, you will see that your rim doesnt sit on your stud but actually that little metal lip on the center of your disk breaks or drums.

Our stock centerbore is 70.XX .. the rims i got were 73.0 so i had to get a plastic centric ring to fill in the whole. Unfortunately, you can only get them when you buy the wheels from www.wheelmax.com since they know what size to send you.

You are correct tido ... I was only referring to the specific bolt circle question :)

[AbsolutGA]

well i know the offset is ok these specific rims offset is 40, ours are anywhere between 38-45, thanks guys