Angel eye wiring question

[PhroZen101]

For anyone with angel eyes in their GA....before I start to make some for my car I have a few questions.

1) Where do you hook up the wires from the angel eye?
2) Would they be on all the time or would I have to add a switch to turn them off and on?
3) Can you add angel eyes to your fog lamps, if so does anyone have a pic of what it would look like?

[car audio dave]

1) are you talking about angel eyes for your headlights? there should be (1) contant power, run it to battery, (2) ground, run that to any bare metal, (3) switched power, look below. if you dont have those hookups then you need a relay.

2) i have mine hooked up to a switch, but i might rerun them to my parking lights, then ill i will have to do is turn the foglight switch off when my lights are on.

3) to add them to your fog lights get fogs that already ahve angel eyes. i got mine at pep boys. (brand = optilux)

[Cobra^R]

Originally posted by car audio dave


3) to add them to your fog lights get fogs that already ahve angel eyes. i got mine at pep boys. (brand = optilux)

Wondering, if you gotta get all new lense and stuff, what size do you need to look for? (housing size, etc)

[T3rry]

it almost has to come with new lenses as the angel eyes are usually built into the lense

[Matt95GT]

Originally posted by Cobra^R
Wondering, if you gotta get all new lense and stuff, what size do you need to look for? (housing size, etc)

It's Hella/optilux model 2500. The lens is about 4" diameter

[Merlyn]

the hella optilux angel eyes fit perfectly. with little modification, you can use the stock brackets, and use stock wiring.

http://www.gaownersclub.com/forum/attachment.php?s=&postid=70908 http://www.gaownersclub.com/forum/attachment.php?s=&postid=70913