How to: Remove Spoiler 99+

[DowmaceWH99]

This is a how-to for those of you wanting to smooth out your GA or add on a new spoiler,
Things you'll need

10mm Socket
Socket wrench
Blow dryer or heat gun
fishing line or some kind of thin strong string
lots of patience and goo-gone
vinyl(electrical) tape the color of your car


First take off the 10mm nuts that hold the trunk lid on, they just unscrew like normal bolts, they should look something like this 2 on each side,http://www.gaownersclub.com/forum/attachment.php?s=&postid=293173

[DowmaceWH99]

now you'll need to get your hair drier or heatgun and your fishing line, if you've taken your badges off you know how to do this step, just heat up the bottom of the trunk lid or point the heat at this lip, and run the string under the spoiler sawing from one side to the other,http://www.gaownersclub.com/forum/attachment.php?s=&postid=293176

[DowmaceWH99]

now your going to have some nasty looking spots on the trunk lid they'll probably look something like thishttp://www.gaownersclub.com/forum/attachment.php?s=&postid=288825after you lift the spoiler off the car, use your goo-gone and a rag and your fingernails to get that crap off, when your done it'll look something like this
http://www.gaownersclub.com/forum/attachment.php?s=&postid=288824

[DowmaceWH99]

now get your vinyl tape and cover up the holes with it since my car is white I used white, so if you got black use black, heh you guys should know this anyways,
Where'd the holes go?
http://www.gaownersclub.com/forum/attachment.php?s=&postid=293181