LED/ NEON side by side view (my truck and car)

[magyver]

i had them both chillin in the driveway while modding tony's GA w/ some led's so i had to have some moood lighting, so i took a picture of my topless s-10 w/ gold series neons and my GAGT w/ euro-effects led underbody's... even though the truck is super low, the kit is exactly the same height as the GA is.... yeah, the gold series is bluer, and has a wider viewing angle, but hell ,it cant change colors and do tricks.....

[magyver]

higher/farther view

[CrashVector]

Just the man I was looking for. I got my new Angel Eyes fogs from Pep Boys like you suggested.

Where did you run the wires thru your firewall to link up with the toggle switch?

[mthegodfather]

Both lights look good.

[Merlyn]

Originally posted by CrashVector
Just the man I was looking for. I got my new Angel Eyes fogs from Pep Boys like you suggested.

Where did you run the wires thru your firewall to link up with the toggle switch?

I used the factory wiring for mine......

[CrashVector]

Factory wires? then how did you rig up the three way switch>

[jds_truck]

what did you wire the under car kit to. like were did you steal power from so that it doesn't blow a fuse or worse

[magyver]

i stole power from the fuse box, all my lighting is on one 16GA wire that is pushed between the power lock fuse, i have never blown a fuse in that car... then i have the power daisy chained to each switch...

as for the fog lights, you can use the factory wiring, but the kit should come w/ a relay! use the power wire that goes to the original fog light as the signal wire for the relay and you can use your factory switch.... its 10X's eaiser that way and works just as good...

[TA^Guy]

On topic, those look great. I think after I sink some cash into my truck this spring maybe I'll have a few coins over for a white & blue neon or led setup.

[greenguy]

i think Ill try that magyver. i looks at PYFC i think and that look way too messed up. they say that you have to drill into your switch. anyway..so how exactly did you wire it? just so im clear.

[magyver]

Originally posted by greenguy
i think Ill try that magyver. i looks at PYFC i think and that look way too messed up. they say that you have to drill into your switch. anyway..so how exactly did you wire it? just so im clear.

take out original fogs, T-tap into the purple wire that is by the plug of your fog light, run that wire to the "input" of the relay (this should be like white or some color like that, its also the wire that is coming from the switch that they give you in the kit) then simply give it power from the battery and a good ground and your done, no firewall drilling, all wires in engine bay.. you only have to tap one side, i used the drivers side cause its right there... then run the wires given to your fogs.. easy as cake, should only take you >30min to wire up.... and 3$ in t-taps...

[Nike0302]

Originally posted by greenguy
i think Ill try that magyver. i looks at PYFC i think and that look way too messed up. they say that you have to drill into your switch. anyway..so how exactly did you wire it? just so im clear.

i have the pfyc lights in my car...they look great...took about an hour or two from start to finish...you do have to drill a hole for the relay but you can just like put it someplace like behind the battery....i think they look awesome...lots of compliments

[Trancer]

I have green Street Glow Gold series under mine. They are hellacious bright. I also had Red Gold Series under my lowered S-10.


http://us.f1.yahoofs.com/users/1f4b6811/bc/7282/__sr_/0598.jpg?phuZLABBuiq27s6n

http://us.f1.yahoofs.com/users/1f4b6811/bc/7282/__sr_/bbe8.jpg?phuZLABBP0KZxGgT

[greenguy]

thanks guys.