TheNewLMHDesign
08-03-2004, 11:15 PM
I just got done talking with Hot-Bodiez and they said that if we can get 12 people to pay 1k for the new body kit i've been working on, that they will get us the kit. I know this is probably a long shot, but 12,000 is how much it takes to make the mold, and this is not some fiberglass stuff, this is the same material used for our OEM bumpers, and if you've been in an accident, you know what I am talking about when I say that that stuff is nearly unbreakable.
Personally, I totalled the front of my car, and it screwed up the frame and the hood, but when all was said and done, there was absoutely no damage to that bumper. It just "folded" right back to the original way it was.
Anyways, hopefully we can get this to go. You can email JR at sales@hot-bodiez.com if you have any questions.
I posted some images below of the kit.
Also, on a side note, the back bumper will have the holes for the muffler, just between my new job and other things, i haven't had much time to work on finishing that back.
Let's do it guys!
Just do the same thing like the RSM Strut Bars, your name, and how many you want (jk). Just your name, and how you can be reached.
Front Bumper and Side Skirt:
http://img21.exs.cx/img21/3493/TheChallengerWOFrontGrill.jpg
Back Bumper and Side Skirt:
http://img22.exs.cx/img22/2931/TheChallengerBackEnd.jpg
By the way, the kit will include the the mesh for the vents in the front (pre molded into the kit), as well as the fog lights.
PS- Some modification will have to be made to the front to allow more air into the radiator to prevent overheating. Where should those holes be?
Personally, I totalled the front of my car, and it screwed up the frame and the hood, but when all was said and done, there was absoutely no damage to that bumper. It just "folded" right back to the original way it was.
Anyways, hopefully we can get this to go. You can email JR at sales@hot-bodiez.com if you have any questions.
I posted some images below of the kit.
Also, on a side note, the back bumper will have the holes for the muffler, just between my new job and other things, i haven't had much time to work on finishing that back.
Let's do it guys!
Just do the same thing like the RSM Strut Bars, your name, and how many you want (jk). Just your name, and how you can be reached.
Front Bumper and Side Skirt:
http://img21.exs.cx/img21/3493/TheChallengerWOFrontGrill.jpg
Back Bumper and Side Skirt:
http://img22.exs.cx/img22/2931/TheChallengerBackEnd.jpg
By the way, the kit will include the the mesh for the vents in the front (pre molded into the kit), as well as the fog lights.
PS- Some modification will have to be made to the front to allow more air into the radiator to prevent overheating. Where should those holes be?