Painting Dashboard

[JHahN812]

Is the dashboard all held 2gether by clips? I cant seem to get out the piece around the gauges. Is there an easy way to get this stuff out?

[tdub4life]

In my 2001 SE, the piece around the gauges is held together by the two screws you see on the under side of the top of each opening, 2-4 (?) clips on each side, and also two screws located farther down the steering column. You'll have to take the cover around the steering column off, there should be three screws underneath that will loosen it. After you do all of this, it should come right off ;)

(If someone wants to fix/addon, be my guest)

[JHahN812]

Also, is there an easy way to get my heat vents out? I managed to pull 1 out, but the others are really stuck in there.

[95GAinFLA]

for the dash, once you get a little bit loose, just lift it up and you'll be able to see/feel where the other clips are at.

the heat vents you can pop out from behind once you get dash out.

[JHahN812]

I got the dash loose enough to where I can reach around the other side of the vents, but I can get to the clips. The heat tubing is around it. Do i have to rip that off to get the vents out or is there an easier way?