My new intake

[Grandamn]

http://memimage.cardomain.net/member_img_a/169308_78_full.jpg
http://memimage.cardomain.net/member_img_a/169308_77_full.jpg
http://memimage.cardomain.net/member_img_a/169308_79_full.jpg

not bad for custom made. Looking for a K&N cone filter

[mthegodfather]

I can't see the pics?

[Grandamn]

can yousee it now

[ecko70]

damn that is clean....Lookin good

[Themeneea]

loooks good, but about your intake.
The TB is right at the front were the fresh air is, why didnt you just put the cone on there and remove the black plastic cover?

[VanishingImage]

Very nice, but I would be looking for a 90 degree rubber elbow to replace that air box,thats restricting the air and not letting that intake to be fully utilized.

[Grandamn]

iof anyone knows where they sell 3" rubber elbows id really appreciate it

[Lost My Keys]

home depot or lowes

[Grandamn]

been there done that try again. also one thing i learned is pvc 3" is different from Alum 3" piping. i firsy had a 3" coupler for pvc and it was way to big for my intake

[VanishingImage]

They are out there you just have to look,im having the same problem. Everyone says a place, you go to it and its not there and you ask the people there and they say they don't carry them:???: Just keep looking and go to small hardware stores,sometimes they will suprise you.

[Grandamn]

about a week or two ago someone made a post saying hey look what website i found and they had a rubber elbow. tried searching but couldnt find nothing.

[Oldcat]

They turn up on Ebay sometimes. Check in the Turbo Charger section.

[GT2000]

They have silicone elbows on pepboys.com, not sure if that helps at all.

[3 DeeJay]

That looks pretty good. I jus dunno about the filter on the end. I wish my engine bay area was that clean!!

Another 5 spd eco person.. :)

[AbsolutGA]

i hate reading things late, and not knowing if the conversation is still needed or not, but i am sure that your profile will tell you that i wrote this here... If you are still looking for rubber elbows at 90 degree angles, and 3 inch diameter, here is the site where you can get them for like ten bucks plus shipping. i am having trouble finding them in stores.
http://shop.airflowonline.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=AFSI&Product_Code=90HL3

[coupe]

Obviously his engine bay is gonna be HELLA clean...........its an 04

[Grandamn]

yea its brand new and im trying to keep it that way. i clean it once a week and wax the strut towers

[ronnieb55]

i have 2 90 elbows 1 black
1 blue
let me know if you still need one

[Grandamn]

ive come to realize i need a "cobra bend" its like a elbow but one side is flat.