wipers dont work on high

[neo95]

My wipers work fine on delay and low. But when I put them on high,they drop down (as if I turned them off) and wipe about a 1 inch area. So picture them coming up about an inch then going back down repeatedly. Any ideas?
Thanks guys

[Fishman]

Don't turn them on high!

[Fishman]

(That was a joke)

Don't know what to tell ya. It is a common problem in 92-95 GAs. If you have to use high, try turing them on low, and when they are on there way up the glass turn them to high. That is what I did.

[neo95]

yeah I tried that but it does the same thing. I dunno if its a common prob or not. I wonder if there is a seperate relay for high and low? There must be some kind of seperate component that regulates speed since it works on other settings.

[Snipe33]

In the past I had trouble getting my wipers to turn on in low.......

All I had to do was bypass the low and go straight to high....then the low would work. Cars are strange animals.

[neo95]

Ha, go figure. just one of those weird things I guess

[3100gagt]

it could be a bad trelay some where or the wiper switch in the columb

[neo95]

I found that if I tap the arm (the one on the steering column) slightly in a downward motion, they work on high. Must be a bad switch.