Installin 4 Mini Neon lights..

[GrimeyGrandAM]

Does anyone know how i should install them under my dash board on the driver side and passanger side?? please i need some help with the....also i would like to make them come to a switch...if anyone could help me please get back with me with some detail instructions...Thanks..

[tenspeed]

You can easily get power from the cigarette lighter and mount a switch on the radio trim. The switch would be hidden if you put it under the HVAC controls in the hole.

Where you mount the lights depends on how big they are and if you want them hidden toward the back or out in the open. Use connectors so if you take the car for service, they don't charge you for removing "non standard" parts. The dealer wanted $100 to disconnect my two power wires when they replaced my heater core under warrenty.

[GrimeyGrandAM]

Anyone else have some DETAILED Advise...the neon are a 6in neon ket....

[03GASE3400]

I have all mine...2 10" led tubes and 2 38" tubes running off a...for lack of better term fuse splitter. Can get them from Auto Zone it just holds 2 fuses and replaces one of yours with a wire coming out of it for the new accessory. then for a ground use one of the bolts under the fuse panel so your wires are close together. As for the switch just put it inline with your 12v lead going to the fuse box and mount it how you like, I'd agree with tenspeed and put it under the HVAC controls or maybe the little cubbie under the fog light switch so you don't have to cut holes. Or if you wanted to get really tricky Auto Zone sells a wireless switch setup that if you follow the directions isn't that hard to wire and comes with a key fob for opperation.

[GAspeed]

its easy i have 2 1 broke tho : ( stupid dealer ships but any were heres a pic with wut i did with mine

[GAspeed]

wow that turnd out bad and the second pic is just blurry

[Hodge]

mine are way under, you can't see the bulb at all, i love it. and i think they are 15 INCH

[2001GAGT]

Fixed the pic for ya.

[GrimeyGrandAM]

OK WELL Do i use screws and where would i put them i wanna put them under way under i dont want the bulb to show....but i dont wanna put a screw into something that might **** up something....anyone??

[Brandon]

look at where your going to be placing screws and see if there is anything back there to mess up first.

[Dave C]

check the how-to's section if you haven't done the mod already...