PDA

View Full Version : Location of Mas Air Flow Sensor

PT_Sean
04-17-2005, 09:14 AM
I searched here, didn't find much. Pardon's if it has been posted.

I've been reading, mostly on the 3.3 forum, about hesitation and stuttering. Looks like a dirty MAS was the prob and I'd like to try that before going any further.

Anyone have a pic, or drawing, of where the sensor is on a 99 GA??

Thanks in advance.
Blackrider
04-17-2005, 12:23 PM
Right hand side of engine bay, its attached to the air box, it aluminum with plastic in the middle.
PT_Sean
04-17-2005, 01:34 PM
Thanks for the info...

I removed the 4 torx screws to expose the sensors, and blasted them with Kleen-Flo throttle-body spray cleaner. Seemed to work like a charm!!! No more stuttering/hesitation.

I'll check again later tonite.

here are pics for future reference.

S

http://messages.cruisethefalls.com/uploads/post-1-1113762820.jpg

http://messages.cruisethefalls.com/uploads/post-1-1113762747.jpg

http://messages.cruisethefalls.com/uploads/post-1-1113762788.jpg
Colin
04-17-2005, 04:04 PM
Now that you've got that far you may as well take the rest off and clean the TB as well .....;)
Blackrider
04-18-2005, 08:13 AM
Originally posted by Colin
Now that you've got that far you may as well take the rest off and clean the TB as well .....;) well if he goes that far he might as well rip of the topend and have it ported!!! LOL Jk
Colin
04-18-2005, 10:35 AM
Originally posted by Blackrider
rip of the topend and have it ported!!! LOL Jk That's one way to clean the ports .... :lol:
HondaCivicsSuck
04-18-2005, 10:14 PM
get rid of that MAF sensor and put he stock on back on!
Colin
04-18-2005, 11:21 PM
Originally posted by HondaCivicsSuck
get rid of that MAF sensor and put he stock on back on! That is the stock one .
HondaCivicsSuck
04-19-2005, 12:11 PM
Originally posted by Colin
That is the stock one .

well what happend to the screen?
DontPassTheFence
04-19-2005, 01:10 PM
thats the old, rip the maf screen off mod, right? does that do anything? because my mom owns a 99 3400 SE, and I want to secretly mod it, so when my 97 GAGT gets beat, ill take out her big 01 SE and whoop some monkey ass.
Colin
04-19-2005, 08:25 PM
Originally posted by HondaCivicsSuck
well what happend to the screen? He disassembled it to clean it .