PDA

View Full Version : Problems with Procarparts gauges

invaderzim624
06-19-2005, 08:29 PM
Hey all. A while back I bought reverse glow gauges for my 95 GA. Now I don't know about you, but the openings for the turn signals and similar indicators have never lined up.

Has this happened to any of you? I have called them and they are of no help.
VanishingImage
06-19-2005, 09:09 PM
I have there gauges on my 97 and no problems. You might wanna check to see if they are set in there right.
invaderzim624
06-20-2005, 07:14 AM
Well, I am limited on how much I can move them due to the needles. They are perfectly centered around the needles, so there is not much I can do movement wise.
RAZING
06-20-2005, 03:16 PM
They are machine cut. If they aren't lining up, then just keep trying. I installed them on 2 grand ams and they've been okay. If necessary, drill the hole for the needle a little larger so you can move it over without getting too close to the needle.
VanishingImage
06-20-2005, 07:40 PM
Originally posted by RAZING
They are machine cut. If they aren't lining up, then just keep trying. I installed them on 2 grand ams and they've been okay. If necessary, drill the hole for the needle a little larger so you can move it over without getting too close to the needle.

yea, use a dremel to englarge the needle holes if you can't get it to align right, can't think of anything else that would help.:???: