PDA

View Full Version : Euro tails


Sleek GA
07-05-2005, 05:46 PM
Okay, it's been a long time since I bought and installed the euro's on the GA, but I cannot for the life of me remember if they came with their own wiring harness, or if they used the factory... I have a short in the wiring which is causing my driver side parking light to not come on and it's irritating. Anyone with the Euro's know the answer? if they do then it looks like I have to go digging more into my garage to find the originals

tido_29
07-07-2005, 06:17 PM
I doubt they come w/ their own wiring harness. I will pm someone on aedcentral.com that has them and see what she says.

Sleek GA
07-07-2005, 07:03 PM
I am doubting it as well, because I can't find wires. But please let me know what your friend says, I really appreciate it.

GT2002
07-07-2005, 09:16 PM
Mine did i got them off of ebay!
heres the link....
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33716&item=7985206472&rd=1&ssPageName=WDVW

not the same ones i have but close they have to come with the harness because u use different placement of lights

SilverSurferGT
07-07-2005, 09:38 PM
Which ones are you referring to? The First Gen (Terminators) The Second Gen (Gunmetals) or the TYC's or AED?

My Gunmetals were plug and play...took me less than 10 minutes total from the time i got them to the time i was done installing them :)

car audio dave
07-07-2005, 11:49 PM
yea, the AED ones come with a wireing harness, and they can cause some problems iwth other lights...but it turns out that its nothing major...just a fast turn signal.

Sleek GA
07-08-2005, 02:50 AM
they are the current ones that you can get from andy's or rksport, I picked mine up from RK (they priced matched another site) The fast blinker, I am experiencing that as well, but I had my blinker on and it fast blinked, and I jiggled the wires for that bulb, and it went back to normal, I don't have a voltimeter so I can't physically find out if I have a short in the wiring, but from what I can tell I do. Which is why I'm trying to find out about the wiring harness. I've sent RK a email, but lo' and behold, still no response.