PDA

View Full Version : Universal Angel Eye Kits


Cipher
11-02-2005, 01:30 PM
Alright, ive been researching this for a few days now and heres what ive come up with.

First, Angel or Demon eyes are rings that go around the headlights individually and light up when the engine is on, giving it the look of having eyes on the front of it.

This is accomplished by installing a reflector ring and lights or dim LEDs behind the ring to glow it up, usually a yellow or white accent light.

That was the start of it, on BMW 5 series when they came out, but theyve advanced some since the BMW version, first came LEDs instead of lights at the reflectors, using less power and with a much greater life, 2-8 LEDs placed behind the ring produced the light and reflected to create the eyes, this was the first step

next came the CCFL, Cold Cathode Flourescent Light. Like neons but much much smaller and evenly much brighter. This lets you throw more light from the same space for less money.

Now, so far ive only seen a few companies that sell the kits required to do this outside of the completed housing (which they sell of course) and theyve come in Red, Blue and White.

To install these would involve headlight assembly removal, and as stated in a different thread heated in an oven till the housing glue seperated, letting you get to the reflectors. Drilling small holes in the tops of the housings to slip your harness through, then running to a central location to wire to your acc and grounding wires, so they turn on.

ALL of that said, Ive contacted one of the companies for pricing and availability of 4 ring kits, colors available, and how much well be looking at for them.

Any interest?

http://my.so-net.net.tw/kensu903/CCFL%20B%20instal.jpg

http://my.so-net.net.tw/kensu903/bmw_ccfl_1.jpg


PS - I dont have the exact price yet, I should get a response today or tomorrow, if I HAD to estimate for 4 of them.... around 100 for the lights and harnesses

Bjornboy81
11-02-2005, 02:13 PM
Find out how much and specs (size, how to wire, etc) and I might be intrested...I really like those :)

Cipher
11-02-2005, 02:15 PM
Not sure exactly how large, but theyre the same size as those in the BMWs, since theyre made as a direct replacement?

Dave C
11-02-2005, 03:06 PM
yea, I'm sorta interested... but would need to know the dimensions to make sure it'd fit.

Cipher
11-02-2005, 05:35 PM
Alright, Price correction it should be 50 per set of 4 (Waiting for confirmation) and theyre 3" rings I believe, again, ill check

XoticGA
11-02-2005, 05:40 PM
:woohoo:

What colors?

Cipher
11-02-2005, 06:35 PM
Only ones I could see were red blue and white

ntl5002
11-02-2005, 07:33 PM
Is there anyway to turn these lights on and off?
B/c I don't think it would be entirely legal to have red ones in PA.

Dave C
11-02-2005, 07:57 PM
I'm sure you can wire them to turn on/off however you'd like.

BTW, which rings are these? the LED's or the Cold Cathodes?

Cipher
11-02-2005, 08:08 PM
CC, and you can set them to the acc or to a switch, depending on local regs. The Blue looks a lot more blue then it really is. Its set to about 8k color temp

StreetWK
11-02-2005, 09:11 PM
you can get those on ebay all day long for like $10-$15 shipped

Cipher
11-02-2005, 11:39 PM
Im all for it, post a link, its all I found and ive been trying to get info for a week now.

skateswitch97
11-08-2005, 07:14 PM
yeah i think you can get them cheaper, the installation is gonna be hard though, i ahve seen those rings at like pep boys or some other auto store, keep looking, PM me if you find anything or get started installing them.

Cipher
11-08-2005, 11:12 PM
Yeah, I think I have ADD *lol* I forgot to keep looking before I started rampaging through LED designs for tails :P Ill get on this tomorrow again and find us some better info