Power Output Question

[vipershark11]

well im about to get a new Audiobahn A8002T amp to power 2 of my Visoniks that i think are SVC 4 ohms each. My question is instead of doing each to its own channel on the amp can i bridge the amp and then split the wiring to each sub will this give me more power since it has 800 watts rms bridges and 200 watts rms at 4 ohms x 2?

[tubpub11]

Nope can't do it. if you wire up the subs in parellel that will give you 2 ohms and your amp is not stable at 2 ohms when bridged.

[tubpub11]

However if you wanted the full 800w out of the amp then you could buy 2 more subs and hook all four up to the amp ( two subs per channel) because each channel is 2 ohm stable.

[PontiacGT]

I have that amp sitting at home and will sell it if you want it. PM me.

[dandragonrage]

Don't touch Audiobahn. Check any reputable site (such as the12volt.com) to see how crappy they are.

[vipershark11]

thanks a lot for your help and sorry im not looking to buy a used amp im in the market for new equipment but thanks for the offer ill keep it in mind just in case.