2001 2.4l se exhaust

[ecks57]

can some one give me some links of sights where i can get 2.4l, (4 cylender) grand am se exhaust system with the dule pipes i was looking at borla but it sais it will only fir a v6 i need somthing for a 4 banger that is no ttoo too expensive i have about 700 to spend but the less the better... thankx

[Bjornboy81]

ths slp works with the 2.4L I'm pretty sure :)

www.pfyc.com

[99blackSE]

There was a chick who had some pictures of Borla exhaust on her car...

Ah it was the chick with the silver SE... I think, cant remember your name?

Technically shouldnt either Borla or SLP fit on these cars? I mean the stock exhaust piping is identical from the cat back on either 4 or 6 cylinder cars isnt it? Downpipe should probably even be the same but that isnt important here.

However I wouldnt recommend SLP for the LD9 unless you are doing some boost or more major things. If you just have a intake, and then put on the 2.5 inch piping, your going to have a decent amount of low end power lost, and your fuel economy will probably get worse.

[Bjornboy81]

yes, the cat flange is the same, but Im thinking about obstructions after that. They should both work, but I'm more confident with the SLP. If the Borla fits then I'd go that way because it's 2.25" piping which would compliment the 2.4L better then the 2.5" of SLP.

[99blackSE]

Ah, never thought of the cat flange. Good point Paul.
Do you happen to remember who had that silver SE with the Borla though?

[ecks57]

yeh i would loce to get a borla >>>> http://www.borla.com/products/product_detail.aspx?prod_sku=14821 but the thing is will it fit on my 2001 2.4l ,4cyl SE (2 door)

[Bjornboy81]

Brad, I'm not sure who that was. It does sound familiar, but I can't remember.

Nick, search the web, you should be able to get it for $650 or so...not sure if you were planning on buying from Borla, but $770 is insane!!!

[ecks57]

it sais it fits this >> 2001 Pontiac Grand Am GT 2.4L 4cyl VIN# T AT 4 Spd FWD

[ecks57]

yeh i know where to get them for abotu 650 lol but i just wanted u guys to see what i was talking about

[Bjornboy81]

miss print on thier part...I think they meant Grand Am SE 2.4L....not GT

I looks like it'll fit then :)

[ecks57]

yeh cuz ive never heard of a gt like that lol

[ecks57]

and all of the models that they say it will fit are marked GT and GT1

[ecks57]

and all of the models that they say it will fit are marked GT and GT1 and every where else has that type of info too or they say for v6 cars but the borla sight clearly sais 2.4l

[99blackSE]

Ah, maybe it was Mel's car?

http://www.cardomain.com/ride/398534/7

edit* changed to link instead of direct-linked picture, in respect to pg 1 of the site.

Yeah Borla can be quite expensive, for 2.25 inch catback it would probably be almost cheaper to go custom?

[Bjornboy81]

2.25" pressure bent, stainless steal, borla muffler and resonator, and labor, would probably be about the same...maybe a little cheaper.

Yes, I remember Mels car now...very nice :)

[ecks57]

i contacted borla and told them what car i had and they said they dont make an exhaust for my car :( so i have to start y search all over again

[Bjornboy81]

....they list it on thier website! Are they retarded???

[RocketFast321]

Originally posted by ecks57
yeh i would loce to get a borla >>>> http://www.borla.com/products/product_detail.aspx?prod_sku=14821 but the thing is will it fit on my 2001 2.4l ,4cyl SE (2 door)

What is the muffler part number in that kit, if anyone knows? I don't want speed just a little sound.

[ecks57]

if a exhaust system sais it will fit a 2.2L 4 Cyl, 3.4L V6 — GT, 2 or 4 Door u think if i got it it coudl be made to fit my 2001 2.4l se 2 door?

[RocketFast321]

as far as i know the exhaust is the from the cat on back. Tenspeed has a SLP on his 2002 ecotec

[VanishingImage]

I wonder if the 2.4 kit would work on a pre 99+ GA with the 2.4

Ive got a 97 GA with the 2.4. The only thing I could see not being exact is how the piping before and after the axel is bent

[00SilverGA]

Originally posted by VanishingImage
I wonder if the 2.4 kit would work on a pre 99+ GA with the 2.4

Ive got a 97 GA with the 2.4. The only thing I could see not being exact is how the piping before and after the axel is bent

As far as I know it won't fit your 97.

As far as the 99+ GA's, both borla and SLP will work with the 2.4L. I don't know about the 2.2L ecotech but somone said that Tenspeed has one so it must.

[ecks57]

which borla system will work with a 2001 2.4l se?????

[tenspeed]

I have the SLP cat back on my '02 2.2L Ecotec.

As far as I know, any aftermarket cat back will fit on any 99+ Grand Am. The flange, the hangers and the path are all the same. Some cat backs have larger piping, the SLP has 2.5 inch.

I didn't notice any difference in performance but I don't hammer it either. There was a increase in the noise in the cabin and I got better MPG's because I was shifting sooner.

[Matt95GT]

Both the Borla & SLP catback kits for the 99+ GT (V6) will fit the SE with 2.4. I'd advise against the SLP... it would sound awful on a 2.4. The Borla sounds fine on the 2.4.

[ecks57]

THANK YO UVERRY MUCH ILL BE ORDERING MY BORLA IN A FEW DAYS :)

[ecks57]

MATT95GT JSUT TO BE CORRECT THIS IS WHAT IT SAIS IT WILL FIT >>>
Part Number: 14821

This Part Fits The Following Pontiac Grand Am Model Year(s):
1999, 2000, 2001, 2002, 2003

This Part Fits The Following Engine-Chassis Configuration(s):
2.2L 4 Cyl, 3.4L V6 - GT, 2 or 4 Door

AND IT WILL FIT MY 2001 2.4L 4 CYL 2 DOOR SE? JUST TRYING TO MAK ESURE B-4 I SPEND LIKE 100'S OF $

[ecks57]

sorry for the caps guys (damn caps lock)