robul
03-21-2006, 03:07 PM
Well I recently did the LIM fix and after its got misfires my luck.. Anyhow I figured mabye one of the connectors was loose on an injector so i pulled the intake back off and checked it and it seemed fine.. anyhow put it back together and still the same misfire so i went to autozone and pulled the codes i got a misfire in cyl 3 and injector circuit open. Any suggestions on trouble shooting this? i know i need to check voltage and ohms but its kinda tuff on these cars because you cant have the car running with the injector unplugged because there under the dang intake..
tia
Rob
tia
Rob