replacement intake system for the 3.1L in a '95

[BigRandCarFan_5]

Hey my fellow Grand Am lovers.
As you can probably have guessed, I own a 95 V6. And recently, I started thinking of things that I'd like to do for more power and performance....for fuel effientcy of course, wink wink.
Anyhow, my plans include a new cutome exaust(including headers if I can find them) and flowmaster muffler, aswell as new intake system for it.
Mainly, I want a high flow intake manifold and throttle body. I have a K&N in my airbox now, but might replace that all together for an open unit.
So, if anyone can tell me where I might beable to find a site or buisness that makes direct bolt on high flow manifolds and throttle bodies for the 3.1L V6 in a 1995 Grand Am, that'd be awesome.
Thanxs for taking your time to read this.

[TorquePower]

Originally posted by BigRandCarFan_5
Hey my fellow Grand Am lovers.
As you can probably have guessed, I own a 95 V6. And recently, I started thinking of things that I'd like to do for more power and performance....for fuel effientcy of course, wink wink.
Anyhow, my plans include a new cutome exaust(including headers if I can find them) and flowmaster muffler, aswell as new intake system for it.
Mainly, I want a high flow intake manifold and throttle body. I have a K&N in my airbox now, but might replace that all together for an open unit.
So, if anyone can tell me where I might beable to find a site or buisness that makes direct bolt on high flow manifolds and throttle bodies for the 3.1L V6 in a 1995 Grand Am, that'd be awesome.
Thanxs for taking your time to read this.

I can build you a (Stage 3)Full Cold Air Intake.

check www.milzymotorsports.com
they have P&P upper and lower intake manifolds.

www.rsmracing.com
They should have throttle bodies. Not sure anywhere else.

[BigRandCarFan_5]

thanxs man. I'll check it out and see if that'd be right for my ride.

[BigRandCarFan_5]

Just one question about those. Those are for the 3100 V6, so that should still fit my 3.1 right?
I have a book that says the 3.1 and 3100 have different bolt patternes on the intake.
If you can let me know, that'd be great.
Thanxs.

[Colin]

Originally posted by BigRandCarFan_5
Just one question about those. Those are for the 3100 V6, so that should still fit my 3.1 right?
I have a book that says the 3.1 and 3100 have different bolt patternes on the intake.
If you can let me know, that'd be great.
Thanxs. The newer 3100s have bigger ports than the earlier 3.1 so that would be an issue . Might want to get a set of later 3100 / 3400 heads while your at it ...

[TorquePower]

Grand Am = 3100 ( a 3.1L SFI ), so do you mean you have the 3100 (3.1 SFI) or do you mean you have a swapped in 3.1L MPFI?