DRL Disable 04 GAGT

[slowbird]

I was going over the DRL disable How to and I just opened up the relay box under the hood...located the DRL one (#22 IIRC) and yanked it out.

No more DRL's ...no SES light.

Mybe to add on to the DRL thingy.

[Tidester]

Ok. Showing my ignorance. What is DRL and SES?

[Bjornboy81]

DRL = Daytime Running Lights
SES = Service engine soon

[Tidester]

Nevermind, I figured it out. Daytime Running Lights and Service Engine Soon.

[Bjornboy81]

Originally posted by slowbird
I was going over the DRL disable How to and I just opened up the relay box under the hood...located the DRL one (#22 IIRC) and yanked it out.

No more DRL's ...no SES light.

Mybe to add on to the DRL thingy. Matt, do your lights still work...high beams and low beams???

[slowbird]

Yes.

All my lights work fine.

[B'sGAGT]

Heys hows this one for you guys wanna disable your DRLs on your 96+ go to your local GM dealer and ask them to use the TechII scan tool to turn them off, its really easy and should be really cheap if not free.
Just my 2 cents

[Sc0oB]

hmmmm interesting... will this work for my 00' SE?

[slowbird]

For the 00 se you may need to do the grounding thing in the original DRL disable post.

[99GrandAMSE]

Originally posted by slowbird
For the 00 se you may need to do the grounding thing in the original DRL disable post.

... you are correct, what you did only works on 2003+ :(

[slowbird]

Originally posted by 99grandamse
... you are correct, what you did only works on 2003+ :(

Odd how that only works on 2003+ GA's.

[XoticGA]

I did it to mine last weekend.. That thing was a bitch to get it out!

[iceman]

Originally posted by B'sGAGT
Heys hows this one for you guys wanna disable your DRLs on your 96+ go to your local GM dealer and ask them to use the TechII scan tool to turn them off, its really easy and should be really cheap if not free.
Just my 2 cents

Nope.

[B'sGAGT]

Nope what? it doesnt work on your 01? i could be wrong about it working on all GAs 96 and up but I do know as long as the vehicle is equipped with OBDII (all makes and models 96 and up) with the dealer specific scan tool you can access the BCM. Ill look into it at work tomorrow, i havent played around too much with the tool but i would assume itd be the same thing, if not then i apologize in advance for not doing my research before posting

[iceman]

Sorry.. We know what to data to send to the BCM to disable it yeah, there's a procedure to do it.. but will dealers do it ? No... unless it's for a law enforcement car and requested on proper letterhead.

[slowbird]

Originally posted by XoticGA
I did it to mine last weekend.. That thing was a bitch to get it out!

Ya...wasn't it?

had to take out the one next to it and get some needlenose and yank it.