PDA

View Full Version : RAdiator Flush


gordo55
08-27-2006, 09:05 PM
1994 Pontiac Grand AM SE. I flushed the radiator today and sincxe refilling the low engine coolant light stayus on and the car overheats.This car has a sealed rad. and can only be serviced through the reservoir.I was wondering if I had to bleed one of the water lines or waht?
Thanks for any advice.

nice96gt
08-27-2006, 09:09 PM
You probably have and air pocket in the line somewhere. Do a search. You should find the stuff.

Here's a quick search
http://www.gaownersclub.com/forum/search.php?s=&action=showresults&searchid=575060&sortby=&sortorder=

gordo55
08-27-2006, 09:55 PM
Thanks for the quick response I think I found the answer I will try it tomorrow

gordo55
08-27-2006, 09:59 PM
Another problem I have is I cant remember where the hose for the pvc valve connects at the back of the motor.Ther are two hoses hooked up to th module 1pvc and one that run to the front of the car and back around and under.I cant remember if the pvc line was on the top or the bottom connector.
thanks

gordo55
08-27-2006, 10:01 PM
This is just above where the oxy sensor goes