2.4L supercharged

[SEdrvr919]

ok, ive used the search button and ive looked at the previous posts, but i just straight up and simple wanna know the different brands of s/c for a 2.4L and links if possible, if seen the GM one and the RSM one, but are there any others, and about how much power would they put out? thanks

[BadBlack00Ga]

Those are the only 2 available.

I think the GM is estimated around 40hp gain over stock.
RSM was claimed to be about 60hp, but take any claims from them with a grain of salt.

[Shad0wguy]

I read GM's supercharger claims it boost output up to 220HP.

Heres info straight from GM

2.4L Twin Cam Supercharger


Add up to 50 horsepower and 40 lb.ft of torque! Designed for 2000-2002 GM vehicles with 2.4L Twin Cam engine (RPO-LD9). Kit includes all mounting brackets, air ducts, adapters, Serpentine belt, Gen II MAP sensor and spark plugs. Can be installed LD9 with normal hand tools. For manual and automatic transmissions.


Part: 12498660

[SEdrvr919]

Alright, MUCH APPRECIATED!

[urweak]

There are only two kits. There is the RSM kit, althought RSM is out of business and Zspec took over what parts they had left. And then the GM kit.

As far as costs go, the RSM kit was in the $3k range, the GM charger can be had for around $2K. Also the GM kit comes with a tune and everything you need for your 2000. On the other hand RSM does not have a tune (the tune they said was included turned out to be fake so they basicly sold people bogus parts)

The hp gians have already been listed above, but you have to understand that if you ever want more hp out of the RSM kit you have to buy the upgrade kit (which is expensive), as for the GM kit all you have to do is buy a smaller pulley that will run you under $200 or so.

So i would buy the GM kit over the RSM kit any day.

[VanishingImage]

yea GM kit hands down. There are 2 members I know of with either the 2.3 and the 2.4 that have the GM kit and have put down some good gains with the kit,one was a custom fab,the other was just a bolt on.

[The Artist]

i'll have stock and 2.6" pulley hp numbers by the end of april

[VanishingImage]

Originally posted by Sweet98GA
i'll have stock and 2.6" pulley hp numbers by the end of april

nice! :D