tail lights

[franwake13]

hey whats up? i was wondering if i can use regular roll tint to tint my tail lights, or what do you think is the easiest way?? thanks guys...
frank

[Wstangland]

i tried it and it doesnt work not flexible enough even with heat. better off going with nite shades thats what im going to do.

[bballr4567]

Yup get night shades. Its rather expensive but its worth it. I just did it and it was a PITA for me because I kept trying to do too thick of a coat and screwed it up.

[Gagt518]

Ebay.com

Type in: 190082952700

[tenspeed]

You could try SMOKE OUT TAIL LIGHT LENS WRAP KIT

ebay - 230015204416

I don't know how it would work with the GA ridges.

[bballr4567]

I dont know how well that would work with the ridges either. It was hard enough to get the paint right much less getting something to mold around it.

[TA^Guy]

Originally posted by gagt518
Ebay.com

Type in: 190082952700
:agree:

I have used NiteShades on many different things and it works great.

Niteshades alone will have a dull finish to it. I cleared over it with a few coats of VHT High Tempature clear coat.

Do a search here on the forums for Nite Shades and you'll find alot of helpful tips.

[RickHigginsHtbr]

that film is what i used on my led tails, i recomend it, just make sure to get big enough sheets, the more you stretch it the lighter it gets.

[DJ~KRYSTALFX]

u can use black mesh from home depot

[sudden_impulse]

Black mesh for tinting tail lights? They're not going for covers, they want the actual lens tinted.

[RickHigginsHtbr]

black mesh is eh, you loose alot with it, not as good looking as tint IMO.

[Brandon]

home depot? ummmm Lowe's ftw!* have to support my work*

[loud2kse]

http://www.rockblocker.net/store/36190.htm

[RickHigginsHtbr]

Originally posted by loud2kse
http://www.rockblocker.net/store/36190.htm

for the price, buy the bulk material and DIY it, you'll have better fitment that way.

[tenspeed]

Originally posted by RickHigginsHtbr
for the price, buy the bulk material and DIY it, you'll have better fitment that way.

I was thinking the same thing Rick. The ebay stuff is twenty bucks less and that's shipped.

[XoticGA]

Originally posted by loud2kse
http://www.rockblocker.net/store/36190.htm

I was way disapointed with that... I bought mine nearly 2 years ago.. And the film was WAYYYY to thick.. Not even a shop could get it to lay right.. Wasted 50 bucks

[RickHigginsHtbr]

Originally posted by XoticGA
I was way disapointed with that... I bought mine nearly 2 years ago.. And the film was WAYYYY to thick.. Not even a shop could get it to lay right.. Wasted 50 bucks

i put it on myself with no issues? well except it didnt go out to the edges without heating / stretching.

[loud2kse]

I've had mine on for over 2 years no,and no problems. It only tookm him like 10minutes to put it on.

[tenspeed]

Originally posted by RickHigginsHtbr
i put it on myself with no issues? well except it didnt go out to the edges without heating / stretching.

What size did you buy? I'm looking at the 12 x 24 inch.