dimples in my seats

[GaSe05]

i got these seats from a junk yard last week and ther was parts siting on the back seats and left these dimples ....so i am thinking of taking the skin off and iron it over a shirt.making sure not to burn them. any one else got some idears .

http://i131.photobucket.com/albums/p319/gase05/MVC-051S.jpg
http://i131.photobucket.com/albums/p319/gase05/MVC-052S.jpg

[RickHigginsHtbr]

if the iron doesnt work.... heat gun?

[Bouchie11982]

i wouldnt try a heat gun, too hot. but try the iron thing.

[TA^Guy]

Steam it. I wouldn't put the iron directly on it. But if you have a steamer try that. If you're going to us a iron atleast put wax paper between it.

[tenspeed]

Warm wet washcloth with a microwavable heat pad.

Set it on there for a while to let the moisture enter the leather. Pull it smooth and use a hair dryer to gently dry it. Apply a coat of leather shoe and boot conditioner and waterproofer.

If it's not a big hassle to get to the back side, you can get the leather wet with a damp sponge or spray bottle. Lay a towel (old - it might stain) on the area and put something heavy on it so it dries flat.

[GaSe05]

thanks for the idears i wouldnt put the iron right on i would put a shirt or pice of wax paper in between.

[Big Joe]

I'd try a hair dryer before a heat gun myself. Heat guns get crazy hot.

[GaSe05]

i did the iron thing to day it made it alot better but ther still ther they got streched to far