Gear selector bulb went out

[kutiefine]

If it's not one thing, it's another with my car. Now, my bulb on my gear selector/shifter went out. I don't see any screws holding the console down to get to it. How do I change the bulb?

[girlcrazy_4]

it means that your transmission is about to blow. It'll say it in the owners manual

[RocketFast321]

just pop the trim ring up. And there is about 4 clips that hold the PRND321 thing on.

It's a standard blub size. Also the blub may hard to remove. When you install the new blub put some grease at the bottom of your new blub.

[Sweet98GA]

GREASE on the bottom of the bulb? RIIIIIGGGGHHHHTTTTT

You don't need to grease a bulb, but you are right on the trim ring. Just pull it up, and it'll pop out. If you open the owner's manual, there should be a page that gives you part numbers for the different bulbs in the car, or just take it to the parts store and give them the dead one and ask for a new one