Spark Plugs

[tkgrand]

Alight, i bought some new spark plugs, removed the air intake crap thats in the way, but how the hell do you still get to the plugs?

[2K SE]

Take out the 4 bolts that hold down the IDI cover (the plate that says 2.4 Twin Cam). Unplug the electrical connection from the passenger side of that cover.
Carefully pull up on the cover and the boots will separate form the plugs.
I usually grab the shop vac and clean all the s#$+ from around the plugs. Better to not let anything fall down there when the plugs are out.

[tkgrand]

sweet thanks for the tip

[kaycee]

The elect. connector is on the drvs side,sometimes it takes a little force to pull up on the cover.

[2K SE]

Thanks for correcting me, it is the drivers side. duh.

[tkgrand]

ne trick for gettin the boots on the cover back on there so you know their all connected?

[kaycee]

I put some of that dieletric grease on the boots and make sure they r pretty close to straight up and down then just push the cover down.

[tkgrand]

alright thanks for the input