Seats?

[h_bodyfreek]

Ok im puttin in racing seats in the front of my car but do they make custom seat covers t match the back seat or is there a way to install racing buckets in the rear also?

[Silver 4 door]

I would say its possible. I want to have 4 buckets in mine sometime, but I have the leather interior and love it.

[mc_88]

depends what type of seats you get. I know ive seen rear seat covers on ebay once. I was looking at white ones with the middle seat part black. (looks better than it sounds). So i say it really depends what type of seats ur getting.

[Nighthawk243]

You can make it a 2+2 setup. There was a concept GA with rear buckets. You would just need to make custom brackets and maybe add a bit of extra carpeting.

[GT2000]

Originally posted by Nighthawk243
You can make it a 2+2 setup. There was a concept GA with rear buckets. You would just need to make custom brackets and maybe add a bit of extra carpeting.

Yeah, I was going to mention that. Anybody have any pics or remember what concept it was?

[DSMMAN]

What about something like this ?

http://i114.photobucket.com/albums/n247/wgrjr/Work%20IN%20progress/773795_41_full.jpg


Not the best picture but I will keep searching the photos I have

[h_bodyfreek]

YEAH I AM ACTUALLY GETTIN TENZO SEATS FOR THE FRONT PROBABLY, WOULD I BE ABLE TO USE THE SAME TYPE OF BRACKETS FROM A STOCK GT IN THE REAR WIT SOME METAL FABRIACATION?

[Nighthawk243]

Did a search on it... found this car domain in another post:

http://www.cardomain.com/ride/482117/11

[Nighthawk243]

Originally posted by h_bodyfreek
YEAH I AM ACTUALLY GETTIN TENZO SEATS FOR THE FRONT PROBABLY, WOULD I BE ABLE TO USE THE SAME TYPE OF BRACKETS FROM A STOCK GT IN THE REAR WIT SOME METAL FABRIACATION?

You can do anything with enough fabrication. :cool:

Btw, move your left pinky 7/8th of an inch to the left and press down. ;)

[car audio dave]

Originally posted by Nighthawk243
Did a search on it... found this car domain in another post:

http://www.cardomain.com/ride/482117/11

hehe thats my page. glad to see its getting some use.

[h_bodyfreek]

ok , dave, thats your page but the concept car is not yours i take it.Or is it, either way is there any way you could give me a few pointers on installation and the bracket set up. the second set of seats and the console isnt the issue, but what about difference in the height of the floor? would i have to cut out that part of the floor and weld in something a bit lower? or could i mount the bracket right of that area?

[Nighthawk243]

Originally posted by h_bodyfreek
ok , dave, thats your page but the concept car is not yours i take it.Or is it, either way is there any way you could give me a few pointers on installation and the bracket set up. the second set of seats and the console isnt the issue, but what about difference in the height of the floor? would i have to cut out that part of the floor and weld in something a bit lower? or could i mount the bracket right of that area?

As far as brackets, you should be able to get the seats the same height as the stock bench is. You would basically pull the whole bench out, then just mount in the brackets. You should be able to pull off using the same style of brackets the fronts use and still retain the height.

[h_bodyfreek]

i was thinking the same thing, but one problem, if you look at the fronts and the rear bench..... the front bottoms are dead even with the bench and the floor in the front is alot lower than where the bench mounts in... wouldnt that cause a problem?