New lighting mods, 56k watch out

[Nick_Wa]

Heres some pics of my newest mods, mostly lighting, hope you guys like them.

HIDs on dark road
http://i180.photobucket.com/albums/x282/nick_wa/June21HID015.jpg

HID output , 6000k
http://i180.photobucket.com/albums/x282/nick_wa/June21HID008.jpg

Halogen vs HID
http://i180.photobucket.com/albums/x282/nick_wa/June21HID005.jpg

LED curtain rod angel eye on fog lights
http://i180.photobucket.com/albums/x282/nick_wa/June21HID006.jpg

Halogen vs HID
http://i180.photobucket.com/albums/x282/nick_wa/June21HID004.jpg

Halogen vs HID output, I adjusted my headlights after this, right one was WAY high and left was pointed to the left alot.
http://i180.photobucket.com/albums/x282/nick_wa/June21HID003.jpg

Cathode angel eyes, have these and fog light angel eyes on a relay so they are on with the car and off with the car, DRLs are also disabled.
http://i180.photobucket.com/albums/x282/nick_wa/HPIM0633.jpg

BEFORE:
http://i180.photobucket.com/albums/x282/nick_wa/June21HID016.jpg

AFTER: Cleared GT tails with LEDs, LED license plate light
http://i180.photobucket.com/albums/x282/nick_wa/June21HID018.jpg

Interior at night, cd player can change between 20 or so colors, in case the red is overwhelming haha.
http://i180.photobucket.com/albums/x282/nick_wa/June21HID023.jpg

LEDs in vents, wired to interior so dimmer works for them.
http://i180.photobucket.com/albums/x282/nick_wa/June21HID017.jpg

Clean interior shot, since have hidden wires behind dash
http://i180.photobucket.com/albums/x282/nick_wa/June21HID011.jpg

Painted shift bezel, have also gotten rid of the homeade switch plate and switches to the left of the console on the floor.
http://i180.photobucket.com/albums/x282/nick_wa/June21HID020.jpg

[coupe]

Very very clean, nice job

[c45p3r]

like the lights in the vents how did you get them in there and where did you do your drilling at.. would like to do this also but imop that is just a little too much red

[DSMMAN]

Looks good ...

You have very good taste in sunglasses as well. I notice the Oakley bag there :)

[IllizitGA]

how come your grand am has doulble exhausts?? How did you do that? did you just take it from a GT?

[Nick_Wa]

Thanks coupe, thats what Im going for, and DSMMAN, they do make some sweet sunglasses haha.

IllizitGA, the reason I have duals is becasue I put a flowmaster 80 series single in dual out exhaust on there. Then I got some nice stainless dual tipped tips and put them on there. Similar to the GAGT look.

c45p3r, I was going to snap some pics before I put my dash back together but I forgot. For the drivers side, I took out the gauges and everything and drilled a hole about 8 inches back, right in the bend of the vent tube, this way the led is hidden when you look down the vent. The 3 vents in the middle, some people just use 1 led in the middle since all 3 vents are connected but I put 1 in each vent, right on the bend before the tubes become horizontal, if that makes sense, again so you cant see them when looking down the vent. Now the passenger side is a bit more difficult. It is hard to get the drill far enough back, to get the led out of the way so i just drilled it about 8 inches back and then from the front, took out the vent, and superglued a small peice of plastic in front of the led . This way when you look at it, you see the plastic and no LED. Oh yeah, and to do the 3 middle vents, i took out my cd player and dash kit, and to do the passenger I took out the glove box.

[mc_88]

haha, one time a friend and I wired our vent lights to our blinkers. drove me NUTS!!! haha, since have removed them, but I still like the idea and urs look very nice. I will prob put em back in eventually, but NOT on the blinkers! :lol:

[eselocoss]

What kind of cd player is that? I have red cathodes in my car too and I wanted a cd player that is red to match or can change colors? Let me know, thanks

[Nick_Wa]

Its the Clarion DXZ645MP, very nice deck, bought it 3 years ago but didnt use it till this January, tons of features and still looks classy.

[Mirage]

nice custom work!

[c45p3r]

nick thanks buddy i will be doing that this weekend after i find out where i can get the leds at..

[OpTiMaTeZ]

looks great, i like the vent lights. theres no such thing as to much red.

[c45p3r]

what wires did you hook your leds up to i have mine all installed right now but ran into the problem trying to figure out where to hook them up ever where i seem to hook them up at the wire gets hot and i know i am only hooked up to 12v dc... i want them to be on a toggle so i can run them only at night and turn them of or on when i want.. need some help here