help

[insane4speed]

ok i will be going to albany this year... and i had purchaced some aed tails i was wondering for those that know how to fiberglass if they would be able to fiberglass the mount back on or something

[Big Joe]

I would but I don't know the first thing about fiberglassing. :???: Maybe someone else could be of more assistance.












































:peepsofa:

[insane4speed]

u just dont wanna help me out

[tenspeed]

Since fiberglass is held together with epoxy, why not get some epoxy and glue it back together?

[insane4speed]

well i used the liquid nails silicone thinking it would work but it didnt

[Big Joe]

JB weld might work in your situation. Also the two part epoxy I think I was telling you about at Jay's house. I've used it on some of my en devours and its strong as hell. If you want to wait till we get to Albany ill show ya whats up. Fiberglass would be a good strong hold that probably wouldn't break but epoxy would probably be good enough and alot less work.

[insane4speed]

so i should get the jb weld

[Big Joe]

worth a shot.

[insane4speed]

is there anything i need to do to prep the area

[Big Joe]

clean and scuff.

[nineteen88ga]

It wasn't my doing, but another guy I work with did some"body work" on a custom double din dash opening with JB weld. Its definately strong and bonded to the plastic well. I'd imagine it would work on the fiberglass tail.

[insane4speed]

well here is the funny part i thought the aed tails were came from aed as a fiberglassed tail but they only plastic