All clayed and waxed (56K, you should be OK)

[Blackhawk]

I finally got a chance to use my claybar kit today, and I love it! It removed the overspray that was on my fender and hood for the last six months, and did a number on the brake dust. And no that is not a bra, I haven't been able to get it painted yet. Sorry about it being dark, I can get more pics in the morning.
http://i111.photobucket.com/albums/n134/sudden_impulse/Clay%20and%20Wax/DSCN0607.jpg
http://i111.photobucket.com/albums/n134/sudden_impulse/Clay%20and%20Wax/DSCN0611.jpg Bumper is wavy and doesn't fit, it needs some time with a heat gun and I need to either get a new impact bar or mold the bumper to compensate, previous owner caved in part of it.
http://i111.photobucket.com/albums/n134/sudden_impulse/Clay%20and%20Wax/DSCN0613.jpg Where the overspray was
More at Photobucket (http://s111.photobucket.com/albums/n134/sudden_impulse/Clay%20and%20Wax/)

[ManktheTank19]

Lookin real good :)

[roksoc]

Silvermist FTW!!!!!!!!

[Blackhawk]

I like it better than the later silver, this version has a wider range of colors that it appears as. It can be silver, bluish, tan, hints of purple at times.

['96GAGT]

Looking good man, if that IS an aftermarket bumper cover the fitment is dogshit lol.

[Blackhawk]

Like I said, the impact bar is compromised, and it's also aftermarket. The impact bar has a crease/cave in on the top of the driver's side, so it's also low on the bottom. That pushes down on the bumper and gives such shitty fitment. I'll either get a new bar before paint or mold the bumper to fit the bar better using a heat gun.

[Blackhawk]

Bumper is wavy and doesn't fit, it needs some time with a heat gun and I need to either get a new impact bar or mold the bumper to compensate, previous owner caved in part of it. in the orignal post under the second pic.