Camber adjustment

[Venom]

On my 94 the right front tire is tilted inward and is wearing the outside of that tire and suspension pieces. I replaced the ball joint and control arm bushings and the hub assembly, but the tire is still tilted in. Can I adjust the camber on the steering knuckle to strut bolts? If so which ones do I loosen? Thanks in advance.

[Houndawg]

take it to your local alignment shop. They know what to do and will adjust it to within specs.

[Vaindetta]

ya alignment, your tie rods need to be adjusted.

[Venom]

Actually my toe in is fine, but the camber is off ( the top of the tire is tilted in towards the car) Tie rods are fine. Turns out I got a bent strut assembly, so Im going to buy some new struts and mounts off ebay and see what happens.

[Vaindetta]

Oh, Hope your right this time!

Good luck, Cheers

[Houndawg]

You're still gonna need to get it aligned when you put on the new struts.

[Venom]

Yeah I knew that, but the major camber issue is coming from the strut assembly