VanishingImage
10-23-2007, 08:38 PM
Well this isn't a problem I need help with,but more like a simple check for others that might have the problem I just got done finding and fixing.....
First,if you have a rough idle and possibly a random stall here and there,check ALL VACCUM LINES. I first didn't suspect this because I have looked them over,no hissing noise which is usually a sound that is made by a vaccum leak. Well sure enough there was 1 line I totally overlooked.....
MAP Sensor line. The rubber hose was cracked and slit,barely touched it and made the motor just go crazy. Replaced it,idles smoother.
With this check and doing a good air intake cleaning wouldn't hurt as well. Which is cleaning your throttle plate(Throttle Body) and removing and checking your TPS as well(Throttle Postion Sensor) May just have to wipe it down,if it gets gunked up,may not move well.
First,if you have a rough idle and possibly a random stall here and there,check ALL VACCUM LINES. I first didn't suspect this because I have looked them over,no hissing noise which is usually a sound that is made by a vaccum leak. Well sure enough there was 1 line I totally overlooked.....
MAP Sensor line. The rubber hose was cracked and slit,barely touched it and made the motor just go crazy. Replaced it,idles smoother.
With this check and doing a good air intake cleaning wouldn't hurt as well. Which is cleaning your throttle plate(Throttle Body) and removing and checking your TPS as well(Throttle Postion Sensor) May just have to wipe it down,if it gets gunked up,may not move well.