View Full Version : How to remove door panel?
DarkOzzy1
10-27-2007, 06:27 AM
How do you replace the door panel on a 2000 Pontiac Grand AM?
Silverstone-Z
10-27-2007, 09:28 AM
First, take off the tweeter speaker by the side mirror.
Take off the door handle trim plate (one black screw)
There's then a couple more screws:
1. One is below the door handle (the solid one not the one to open the door)
2. Take off the window control plastic panel and look inside to see another screw.
3. Take off the red reflector on the lower corner of the door (using a flathead and just prying). This is the last screw.
Then, clips are holding the door panels all around. There's a small opening along the bottom of the door panel. Get your fingers in there and just pull. Even jerk it. Otherwise you can just use a flathead screwdriver and pry along the entire door. After all the clips are off, just lift the door panel upwards a little and it'll come off.
Silverstone-Z
10-27-2007, 09:53 AM
http://i37.photobucket.com/albums/e52/Arctic-GTS/02.jpg
DarkOzzy1
10-27-2007, 11:41 AM
Wow, even a diagram :). Thanks, I appreciate it!
Silverstone-Z
10-27-2007, 12:33 PM
I tried my best :)
No problem. I've been taking the panels off quite a bit as of late. Tinted the windows :)
vBulletin® v3.7.3, Copyright ©2000-2008, Jelsoft Enterprises Ltd.