PDA

View Full Version : Removing ignition switch from '95 Grand Am


ranger02
06-07-2003, 05:10 PM
Can someone direct me to a webpage giving directions on how to remove and replace the ignition switch from underneath the steering column on a '95 Grand Am with a tilt steering wheel?
Thought I would try to save the cost of a manual and/or a mechanic.
Starter clicks about 50% of the time (sounds like a bad solenoid), I have replaced the starter (and solenoid) twice, the battery, and the battery cables.
Thanks in advance for your help.

Bill

wiccanferret
06-07-2003, 08:42 PM
It should be fairly simple...just make sure you disable the air bag before you get started. Then just start unscrewing everything you see until you have it off. But then again, I'd be hesitant to mess with anything that has to do with the airbag...