parting out 2 1999 grand am 1999-2005 should fit. in ohio

[part-it-out]

got 2 mostly whole cars that im parting out

both missing front end body parts and tail lights mostly every thing else still there

let me know what you need im in ohio but can ship

[boost21]

how much for a passenger sunvisor in tan color shipped to chicago

[part-it-out]

$30 shipped but i think it might be gray ill get you pics tomorrow when i can see

[Peyman]

plz specify the exact year of each car, exterior & interior color, what type of engine. thanks

[part-it-out]

well it says the year in the title but they are BOTH 1999 grand am se cars

4 door green

i think gray inside

4cly the 2.4 motors

one cars motor has 64,000 tranny has 96,000

other car has 110,00 on motor and tranny

one of the cars has black trunk lid and bumper (rear) trunk lid had a wing on it

any one else need to know more? just let me know

[Deggy Fresh]

both the cars are green? what condition are the hoods in?

[Trigga-T]

both are 4 door? damn it i need coupe door panels

[part-it-out]

one hood is gone other is junk

i only have the drivers fender left out of both cars on the front end body parts

NO front bumpers, front bumper covers, fenders (but the one drivers i have yet), hoods, head lights, tail lights,

that is what i dont have

[mayhem_audio]

any photos that would help alot also location in ohio

[sly fox]

How much for the rear bumper?

[woot]

u got the middle dashboard...the one that goes around the cd player...the dash thing over the gauages...door handle backings....how much if u do and would they fit 99 grand am gt....send pics if possible too

[part-it-out]

wooster area

rear bumper $40 for the black one i have it has one crack

$50 for the green one no cracks

but i cant ship that bigger stuff

ill check on the dash parts but im not sure they will fit a GT

also how do i upload pics?

[Blackhawk]

Interior pieces are the same since they are both automatic. BTW, your 2000 has a 2.4 unless you did a conversion. Use a hosting site like www.photobucket.com and copy the link over for HTML.

[part-it-out]

Interior pieces are the same since they are both automatic. BTW, your 2000 has a 2.4 unless you did a conversion. Use a hosting site like www.photobucket.com and copy the link over for HTML.

i know i hit the 3 instead of the 4 and didnt know till i started posting stuff and dont know how to change it. so o well ill just leave it

[Blackhawk]

Go to the User CP, then hit Edit Profile.

[part-it-out]

how do you get that stuff on the bottom of all your listings?

[Blackhawk]

Edit Signature

[Shadow-D]

As your post says you have 2 radio bezels? I'd like to see a pic of them and whould like to know what the shipping is to 12304 for one (1) of them.
Thanks

[GILSGRANDAM00]

seats both front driver and pass is it leather or cloth

[part-it-out]

$50 each and there cloth the drivers looks like it has a make up spot on it but i think it would come out

had the drivers sold for $75 but they never came to get it so $50 for each and you can have them also thats pick up only

[supra955]

looking for tranny lines off a 3.4 pm me.

[part-it-out]

they are both 2.4 motors

[part-it-out]

As your post says you have 2 radio bezels? I'd like to see a pic of them and whould like to know what the shipping is to 12304 for one (1) of them.
Thanks


whats the radio bezels

[Shadow-D]

the trim around the radio, ignition key and heater controls.

[part-it-out]

$25 shipped

ill have a pic tomorrow ill get a pic of both and you can pick which one you want

[part-it-out]

the trim around the radio, ignition key and heater controls.

http://i14.tinypic.com/6ka5389.jpg

ok i guess i had the pic on my phone of one

[ChaunB3400]

Front Dash Bezzle??? Shipped to 35810??

[Gagt518]

I need the Passenger side A-Pilliar with all the tabs still attached (2) shipped to 12306.
Let me know, Thanks

[part-it-out]

the trim around the radio, ignition key and heater controls.


http://i7.tinypic.com/8331f8z.jpg

and now there is the other one let me know which one you want

[Shadow-D]

They both look to be in the same condition, so either one as long as you can hold out till the weekend.

[part-it-out]

alright thats fine just talk to me in the PM and we can work out the details

[boost21]

Price on the black ring over key cylinder "acc on start"

[Gagt518]

I need the Passenger side A-Pilliar with all the tabs still attached (2) shipped to 12306.
Let me know, Thanks

:???:

[Shadow-D]

alright thats fine just talk to me in the PM and we can work out the details
PM sent

[part-it-out]

:???:

$25 shipped PM me for more details or if you need pics

[part-it-out]

Price on the black ring over key cylinder "acc on start"

$15 shipped

[part-it-out]

Front Dash Bezzle??? Shipped to 35810??

whats that

[Gagt518]

$25 shipped PM me for more details or if you need pics

PM Sent

[Keefer1989]

If its a four door how much for the drivers side window shipped to 19056?

[grandillusions]

climate control switch how much shipped to 38401 i need it cheap

[part-it-out]

$35 shipped

for climate control switch

dont really wanna ship the glass but pm me and we can try to work some thing out

[grandillusions]

$35 shipped

for climate control switch

dont really wanna ship the glass but pm me and we can try to work some thing out

well that sucks my other option was cheaper i was hoping u would be the cheaper of the 2 thanks tho man.

[AeR0]

leather seats?

[Shadow-D]

Money & PM sent.

[part-it-out]

well that sucks my other option was cheaper i was hoping u would be the cheaper of the 2 thanks tho man.

how cheap do you want it?

also the seats are cloth

[grandillusions]

how cheap do you want it?

also the seats are cloth

ive found it for 20 shipped

[part-it-out]

thats a good deal i wouldnt pass that up

[bp's97GAGT]

pm'd

[part-it-out]

bump

[part-it-out]

no one wants any parts?

i need this stuff gone

[Peyman]

i need the base where the battery sits in...

its held down by a big bolt, and under the battery there are about 3 little screws that unscrew that trey out... i need that trey under the battery w/ all the bolts...

please name your price w/ shipping to 90212 (cali)

PM ME thanks

[DC07]

got 2 mostly whole cars that im parting out

both missing front end body parts and tail lights mostly every thing else still there

let me know what you need im in ohio but can ship



got pics?

[part-it-out]

got pics?

had pics computer crashed just waiting for the photo shop crap to finsh down loading then resend them there then post them

[part-it-out]

http://i29.tinypic.com/slnosg.jpg

http://i26.tinypic.com/2vinszp.jpg

there are the best 2 pics i have of the car

the last pic was of when i first got it

the front end body parts are gone (i only have the drivers fender left)

(hood, pass. fender, bumper, bumper cover, head lights, are GONE from both cars)

i will have more pics soon i guess i cleared the pics from my camera so ill take more and put them up

[spy]

how do the rear seats look? Pictures?

Also the trunk carpet, how does that look between the two cars?

Are the motors taken out of any of the cars yet?

[part-it-out]

both cars rear seats are good will have pics soon

the trunk carpet is good also ill get pics of that too

yes the motors are both still in the car

[spy]

both cars rear seats are good will have pics soon

the trunk carpet is good also ill get pics of that too

yes the motors are both still in the car

rear seat pics would rule,

What are you looking for the trunk carpet?

Are you in a position to ship the engines at all?

[part-it-out]

rear seat pics would rule,

What are you looking for the trunk carpet?

Are you in a position to ship the engines at all?


if you set every thing up where they pick it up and they wrap it and junk

both motor are 2.4L and both run

pics will be here tomorrow also give me your zip for the shipping quote if you havnt already

[part-it-out]

i need the base where the battery sits in...

its held down by a big bolt, and under the battery there are about 3 little screws that unscrew that trey out... i need that trey under the battery w/ all the bolts...

please name your price w/ shipping to 90212 (cali)

PM ME thanks

hey the bolts were junk and one wouldnt come out so the plastic where the last bolt was is now broke. its just a little bigger than the bolt head. but let me know if you still want it

[fenixz prime]

How much for the rear pillar with the clips still on passenger side? Also how much for the rear seats since theres two and the other guy might get one I would like to know how much the other is. Also how much for the center console which includes the part between the two front seats? Shipped to 08021 NJ. Also how much for carpet on trunk? As cheap as possible with combined shipping please.

[part-it-out]

rear piller $20

on the center console are we talking about the whole thing (by the shifter all the way back to where it ends?) or how much are we talking?

also just like i said to the other guy you would need to set up ALL the shipping on the bigger stuff. that means they pick it up how it came out of the car and they package it up and they take it to there office and ship it out. and you pay them before they pick it up.

also the trunk carpet has oil stains in it i poped the trunk and there was a whole bunch of extra parts that came with the car that were dirty and messed up the trunk

let me know and ill get you prices on the other stuff

[Gagt518]

I need the Passenger side A-Pilliar with all the tabs still attached (2) shipped to 12306.
Let me know, Thanks

Bump! What color is it? Grayish right?

[part-it-out]

ya ill get a pic up here

[Gagt518]

Alright thanks

[part-it-out]

Alright thanks


http://i25.tinypic.com/5vn982.jpg

http://i29.tinypic.com/5f3xqa.jpg

there are the pics

[Gagt518]

Thats the rear, not the front. Anyway thanks for the pics but i bought one new from the stealership for $18.00

[woot]

u still got the radio bezzle...part that holds radio and cup holder part that will fit 99 gt?

[part-it-out]

u still got the radio bezzle...part that holds radio and cup holder part that will fit 99 gt?

ya there is a little crack on it by where the radio goes. its the same ones in the pics on page 2

let me know one sold but i still have the other one

$20 shipped cause of the crack but it wont have (ets and the 4 way buttons)

let me know

[woot]

if its cracked nvm thnks tho

[part-it-out]

http://i25.tinypic.com/nlej6c.jpg

here is a pic of the crack let me know thanks

[caleb06]

Do you have this and how much?
Is it in good shape- no pitting or cracking?

[part-it-out]

nope head lights and tail lights are both gone for both cars sorry guys

[Shadow-D]

Hey I forgot to let you know I got the radio bezel and it looks fine. Thanks

[towlie325]

I need the rear deck cover, the whole cover or just the carpeted part. Please let me know what the cost is shipped to 66106 if your have one

Thanks

[part-it-out]

Shadow-D sounds good glad you like it

towlie325 im pretty sure that is gone

any one else need parts?

only got one 1999 grand am left sold the rest of the other one

[AznGA]

How about a power window switch for rear passenger?

[part-it-out]

$7 shipped

[Nick_Wa]

Do you still have mirrors and if so

A. Are they power?

B. Are they dual post or mickey mouse?

[roksoc]

how much for 2dr sail peices without tweeters.

[part-it-out]

Nick Wa mirrors are gone

roksoc the car is a 4 door

[Gagt518]

Sail peices should be interchangable no matter 2 or 4 door :???:

Have a LIM? or HVACC control?

[part-it-out]

Sail peices should be interchangable no matter 2 or 4 door :???:

Have a LIM? or HVACC control?

didnt know also what are sail peices?

and whats lim and hvacc im guessing hvacc is the heater/ ac controlls and there gone

[Gagt518]

didnt know also what are sail peices?

and whats lim and hvacc im guessing hvacc is the heater/ ac controlls and there gone

The sail peice are on your front two doors. If you own a GT model, you have tweeters mounted on them. The LIM is the Lower Intake Manifold. The HVACC is the heater. I dont need the knobs. Do you or dont you have it?

[part-it-out]

ya the sail things are not there

and the heater thing is gone (the whole thing knobs and all thats under the radio)

intake is going with the motor thats pending

[Gagt518]

Ok Thanks

[Nick_Wa]

I have an SE1 and have tweeters in the "sail" peices

[Smusser]

I am looking for a drivers side front A-Pillar with tabs and the little piece of plastic between the sun visors. If you have any of these please let me know, Thanks!

[part-it-out]

one of the grand ams had them but they were gone when i got the car and that whole car is sold

and the one i have left dont have them

smusser $20 shipped

[Smusser]

So you have both parts I am looking for? If so please PM me to let me know, and I will send the money ASAP. Thanks!

[fenixz prime]

Just wanted to get an estimate on how much transmission is.

[part-it-out]

smusser the thing has a crack in it so its junk

fenixz prime you got 2 to pick from one not sure the miles said it had 90,000 but i dont know $50 its yours

other one has 110,000 i know for sure its still in the car it will be coming from so you can drive it around and let me know what you think of it $100

thats picked up only if you need it shipped you set it up and have them pick it up and wrap it or what ever

let me know

[spy]

wow wanting to sell stuff, but not willing to do any packing.

[agentkolb]

Do either of the cars have a front drivers door that is in good condition? not so much worried about the mirrors if you sold those already, but looking for a door, internals, and obviously not just cut at the wires, would ask that those be disconnected on the door side as I can run my wires to them.... Im not even worried about having the door panels lol.

[Gagt518]

I need a HVAC unit..Can you help me out :???2:

[02SilverGT]

i need the full seat braket with sliders from either the passanger or drivers side

[part-it-out]

spy why would i waste my time packing the big stuff when they unpack it and put it on a pallet and charge me more? they will pick stuff up i have done it before when i got a motor from MI they come to the house its at pick it up and then package it up.

agentkolb have one drivers door it dont have the mirror or the master window/lock set ill leave all the wires in there and window, motor, speaker, door pannel, handles for $125 plus shipping that you set up. with out the pannel $100 plus shipping you set up

gagt518 nope its gone but i did see some one on ebay a couple days ago parting one out i think it was a 2000 or 2001 and wrecked in the front

02slivergt i have a passengers seat with bracket still on it $35plus shipping ill have to check on it and get an idea on weight

[agentkolb]

agentkolb have one drivers door it dont have the mirror or the master window/lock set ill leave all the wires in there and window, motor, speaker, door pannel, handles for $125 plus shipping that you set up. with out the pannel $100 plus shipping you set up

I'll do it without the panel as long as it is from a 4 door sedan. Can we talk via email, or phone?

[02SilverGT]

ill take it, i just dont wnat to seat, i only need the braket. so i dont wnat to have to pay for shipping of the entire seat. But otherwise ill take it

[part-it-out]

i know what you mean that price was only for the bracket i should have it off tomorrow and check how big of box ill need and get the weight and let you know

[02SilverGT]

aight aslong as shipping isnt outrageous ill def take it

and p.s. whatveer the cheapest shipping way is fine i wont actualyl have time to do what i wnat with it till spring break

[agentkolb]

I'll do it without the panel as long as it is from a 4 door sedan. Can we talk via email, or phone?

Part-it-out Did you see this? its RE the Drivers Side Door...

[part-it-out]

ya i sent you a pm let me know if you got or send me a pm

[02SilverGT]

part-it -out did u get that seat braket out and price it for shipping, im reayd to pay pal whne u have the exact amount

[part-it-out]

sorry we had a huge snow storm and i havnt had a chance to get out there yet i hope tomorrow if they get the roads cleared enough lol

[02SilverGT]

understand the snow thing, we had one here on friday and im still all discombobulated with work

[theessence]

How much for both lock buttons shipped to 14701? Just gray and white part you can see sticking out of the door.

[part-it-out]

the drivers went with the master switch and the passengers would go with that switch for $15 shipped

ya the snow does suck but whats worse is alot of it melted then it got to like 5 dergees last night and the roads are nothing but ice it took me 35 mins to get to walmart (it takes less than 5mins any other day) there was like 4 accidents i seen i was driving on the curb half the time to be able to stop cause its all ice and nothing does good on that

[Iburgei]

Do you have wheels available?

[macesidentity]

how much for the following items if still available?
1. pillars, front and back how much each?
2. intake manifold
3. rear rotors
4. inside carpet, boot carpet
5. center console
6. driver side master window switch.

I think thats all for now.

[part-it-out]

Iburgei i have 2 sets of rims and pretty much junk tires one alumnium $150. other set is steel wheel no hub caps $100 they have better tires on them but not by much pick up or pay and set up shipping

macesidentity drivers side piller is broke rear ones $15 each $25 both front one if good $10(passengers side)

intake is getting sold with the motor

has drums for the rear

carpet isnt the best its gray $25

center console which one are you talking about?

drivers side switch is gone

02silvergt i havnt got that bracket off yet cause every time i get time to head over to where the car is at we get snow and i get busy lol.

[Silver 4 door]

do you have a front 02 sensor that will work on my buddy's 03 GT? he dont want to buy a new one...lol

[02SilverGT]

part it out i'd liek to get the braket before my spring break in 2 weeks think we cna make tht happen?

let me know

[Keefer1989]

Hey I need a spare tire cover for in my trunk how much would it be shipped to 19056? thanks

[part-it-out]

ok 02silvergt i got out there today and do you just want the bracket that slides the seat forward and backwards that you need to take the seat cover and stuff off to get to the 4 bolts or do you need the whole bottom seat thing?

i got the cover off to get to the nolts just let me know tomorrow the bracket will be off and ill get you a total

spare tire cover should be ok but it might be stained ill have to get you a price

and for the 02 senser have no clue what shape its in and dont really wanna take it off

[02SilverGT]

i need the whole braket thnakls man

[FusionDreams]

Do you have a wheel barring (entire system, including sensor) for the right front. If so, how much for shipping to 05038? Condition would also be nice to know. Also, may seem like an odd question, but floor mats. Are there any, and if there are, are they anything worth using? I have some crappy plastic ones that were cheap at the time and need to replace them. Thanks.

[FusionDreams]

Bumping and also asking if you have the black rubber molding that goes around the middle of the entire car? All I have right now is the molding long the doors and I could really use some more.

[Nick_Wa]

Part-it-out, do you have 5 vent rings, 2 door handle cup peices (for front doors of coupe), and the shifter bezel? If so how much shipped to K2C 3L5 Canada?

[GILSGRANDAM00]

part i asked u for the brake lines from the e-brake back can u try to take that off let me know

[Keefer1989]

ok thanks pics of it and price for the spare tire cover would be appreciated

[part-it-out]

FusionDreams dont really wanna sell the wheel hub till i sell the motor which should be soon. floor mats are gone, and it dont have molding i dont think

nick wa think i only have the shifter bezel

GILSGRANDAM00 i can try the car is under like 3ft of snow now so its gonna be a pain

keefer1989 same thins ill try to get the pics ill have to uncover it

[Goldie]

How much for the stock cd player and the rear speakers? (selling my GA but want to keep my audio stuff) Also if it has power windows, i need the trim plate that goes around the window switches and the power mirror adjuster thing on the drivers armrest... Let me know...
Phil

[part-it-out]

goldie every thing you asked for is already gone

[Goldie]

goldie every thing you asked for is already gone

Ok...thanks anyway, i didn't read through all the posts...

[FusionDreams]

I could be interested in a head gasket and thermostat if they're both in good condition. Shoot me a price, it probably won't be until next week... I want to make sure I end up getting this car I'm looking at.

[graxall]

Are you still ripping these cars apart? Idk if it was asked but are these 2 dr or 4drs?

[matts]

both 99 and both 2.4? what are the numbers off both computers? and a price shipped to 72416

[Fastlanev6]

I could be interested in a head gasket and thermostat if they're both in good condition. Shoot me a price, it probably won't be until next week... I want to make sure I end up getting this car I'm looking at.

Don't get a used head gasket...buy a new one if you're replacing it on your car.

[part-it-out]

ya im not taking out the head gasket lol by the time i did that it would be junk new ones are not that much get one off ebay or something

also there is only one car left and its a 1999 grand am se 4 door 4cyl motor (2.4L) and the color is green

and matts ill check on the numbers for that computer

[02SilverGT]

got my part today, thnaks

[matts]

ya im not taking out the head gasket lol by the time i did that it would be junk new ones are not that much get one off ebay or something

also there is only one car left and its a 1999 grand am se 4 door 4cyl motor (2.4L) and the color is green

and matts ill check on the numbers for that computer

according to my sources it should be the computer i'm needing, but i would like confirmation before. how much you gonna want for it IF it's the one i'm needing?

[Peyman]

the GA comes with 2 horns... i need both of them... if you have them, PM me or email me shamplayer77@aol.com thanks

[AznGA]

I need that circled part underneath the driver side rear seat.
If nothing is broken, I will take it.

[brucelee13245]

how bout wheels or rims? im a ohioin

[mushroom]

2 Rear Bottom Reverse Lights for a 2002 Grand Am SE1 but i think any 99+ Grand Am bottom reverse lights will work.

[mayhem_audio]

can you make a list of what is left with what you are wanting

[part-it-out]

holly crap i forgot all about this site

peyman i think the horns were sold ill check

aznga ill have to check on that part but shipping will be about 7-10 on it

brucelee13245 you have 2 to pick from alumnium $150 or steels no hub caps $75 both have pretty bad tires on them

mushroom do you need the wiring with the bulb in it or the housings that are bolted to the bumper

mayhem audio i have 1 car pretty much a whole car left it will take forever to list every thing i have

but ill list whats gone

hood, pass. fender, front bumper, head lights, bumper impack, mirrors, tail lights drivers seat heater thing window master switch, cd palyer,

and that should be all thats gone

extra parts i have are jack for the car, trunk that had a wing on it rear bumper alt. some housing for the front axle, and some other parts

o and another 2.4L auto tranny with 90,000 miles on it was told it worked when pulled came from a 2000 grand am i was gonna fix the car but sold it on ebay a while ago and still have this tranny sitting in the back that needs to go or get junked

so that should help every one out pm me for a faster responce

[Gagt518]

Do you have this item left :???2: It needs to have all 4 clips still attached :D

[part-it-out]

ya $30 shipped it should be in good shape ill get you some pics

[mushroom]

mushroom do you need the wiring with the bulb in it or the housings that are bolted to the bumper

both would be best and i want the housing because mine doesnt have a shiny finish any more and the light wiring with the bulb in it because mine ripped out hoe much shipped to winnipeg manitoba r3y1l1 pm me btw

[AznGA]

Yea, let me know when you get that part. :)

[brucelee13245]

is that a 150 dollars each on the aluminum rims or for all four?

[brucelee13245]

oo and how much for the automatic tranny?

[part-it-out]

$150 for the set

and the tranny i dont know nothing about $50 the tranny in this car $100 it has 110,000 miles on it but its in the car and you can drive it around to see it works

[part-it-out]

azngt how many clips does that thing have cause i got it out and i dont think any thing broke off but let me know and ill tell you how many mine has on it for sure i think it was 2 or 3 cant remember

and gagt518 its good with all 4 clips let me know

[AznGA]

I think there is only 2.

[Peyman]

if you have the long tan colored defroster vent please PM me or email me shamplayer77@aol.com

[Gagt518]

I need this peice but on for the PASSENGER REAR DOOR in good condition with all the clips attached

[part-it-out]

payman its gray sorry

and azngt $25 shipped

and gagt518 $25 shipped

[AznGA]

Sounds good. So all the clips are attached? Is it the same color?

I need your paypal. :)

[Gagt518]

Sounds good. So all the clips are attached? Is it the same color?

I need your paypal. :)

Yeah, what he said :lol:

[part-it-out]

ill post pics of both sides top and bottom so you can make sure every thing is there and looking good

pics should be later today

[Gagt518]

ill post pics of both sides top and bottom so you can make sure every thing is there and looking good

pics should be later today

Thanks :D

[part-it-out]

http://i30.tinypic.com/710aip.jpg

http://i26.tinypic.com/2ed7h2x.jpg

ok here are the pics

thats mud on the front of the one it should come off with some water

let me know if your interested

and there are 2 clips for each one

[AznGA]

Yeap, as I said, I will take the driver side one.
What's your paypal and how much?

[mikekanzler]

would you be willing to cut off the drivers reverse light socket with about 6 inches of wire on it? if so how much shipped to 69341?

[part-it-out]

if its still in the car $8 shipped

[mikekanzler]

alright if it is still there let me know and pm me all needed information

[fourPlayTruRome]

Is that the 2 or 4 door? If it's a 2 door, you got the panel on the drivers side rear seat, the lower one under the little window with the arm rest built into it? How much shipped to 54401?

[Gagt518]

Are you sure thats mud :???2: looks good besides that.

[part-it-out]

yes im sure want me to clean it off and take another pic? it was muddy the day i pulled other parts and i didnt care to clean it up

and its a 4 door

[GrandAmGTTT]

would u happen to have an aftermarket exhaust for sale. like a the flowmaster 80 or SLP?

[Gagt518]

yes im sure want me to clean it off and take another pic? it was muddy the day i pulled other parts and i didnt care to clean it up

and its a 4 door

Yeah please

[part-it-out]

no aftermarket stuff other than a cd player and a system thats already been taken out

[AznGA]

Do you have whatever that goes into those 2 circled slots? I will take them.

That is the bracket right underneath the factory airbox.

[GrandAmGTTT]

awww that sucks i'm looking for one

[part-it-out]

aznga on my car thoes are just little rubber things with a hole for the bolt to go in do you want them or were you looking for some thing different?

and grandamgttttt i have other cd players if your interested in one let me know

[AznGA]

aznga on my car thoes are just little rubber things with a hole for the bolt to go in do you want them or were you looking for some thing different?

and grandamgttttt i have other cd players if your interested in one let me know

Yea, if those are the ones that go into those 2 holes, I will take them if they are not broken. It's been a while so I didn't know. :lol:

[part-it-out]

ok the back one came out good (there was no bolt) the other one has a rusted bolt and dont know the shape till i get tools over there to take it off

but you can just have them if you pay shipping

[part-it-out]

you know what it wouldnt even be worth my time for like $1 ill just mail both them out to you for free. same address that the other thing went to?

[bobbg]

need both rear door window regulators. price please

[speedemon77]

i am looking for the plastic housing that goes behind the interior door handles for all four doors also need the door control clusters with or without the controls let me know if you still have em thanks

[part-it-out]

i think it might still have the plsstic housing but id have to check but what are door controllers? the windows and locks?

and i dont wanna take out the window regulators at this time

[Nick_Wa]

Not sure if you have or sold these yet but I need 1 map sensor for my 01 2.4L

[speedemon77]

if you dont have the controls thats cool i need the plastic that the controls attach to and the plastic behind the door handles

[part-it-out]

if its on the engine its gone if its not i might still have it

and ill get you pics of the plastic stuff did you need all 4?

[speedemon77]

yes i do but if you dont have all four thats cool i'll take what you got providing nothings broken

[part-it-out]

i have all 4 and every thing is good but i got a new computer and the pics were saved on my old one that i need to go buy a charger for cause my dog ate the power cord

but fi you wait till i get my camera stuff up loaded to this ill get you pics

but how does $40 shipped sound

[part-it-out]

http://i32.tinypic.com/21o30vp.jpg

http://i27.tinypic.com/339kttv.jpg

here are pics

[FromTheInside]

Do you have a steering wheel, shifter, or e-brake handle available? (all of them must be leather wrapped)

also, if you have the steering wheel it has to have the audio controls on it

[part-it-out]

what do you mean by leather wrapped? i think there are pics of the inside of the car on page 2 or 3

ya its page 2 you can kinda see them both let me know if thats what you mean

[Atlas98]

would you be willing and/or able to pull the wiring for the power windows on both sides, pics would be helpful if you don't mind.

[part-it-out]

only have the rear doors front doors were sold

[Atlas98]

damn...thanks anyways

[FromTheInside]

Nevermind, your parts aren't leather wrapped.

This is what I mean by that.

http://www.zachmonroe.com/images/Vents4.JPG

see the stitched on the inside of the steering wheel? well yeah, the ebrake, shifter, and steering wheel have that on many grand ams and it isn't just a characteristic of the gt

[GASE34]

Do you still have the steering wheel?

[loud2kse]

i need a drivers side front spindle.

[cpt137]

I need the plastic cap the holds the spare tire cover on

[Gagt518]

I need the gas cap

[part-it-out]

holly crap i need to get on here more

yes i have the steering wheel its on page 2 or at least part of it is that the one you need?

ill check on the spindle

have the thing that holds the spare tire cover on i think

and i know i have the gas cap

pm me for a faster responce

[djdatease]

any rims? like the 5 star chrome??

[part-it-out]

nope just steel and alumnium if i had the chrome they would of been gone as soon as i posted this i get asked about them all the time good luck finding them when i found them at a local junk yard they wanted $150 a rim

[Silver 4 door]

need a price on the cruise control cable. my coworker needs one for his 200 SE with the 3.4

[part-it-out]

just the cable? or the whole box thing? and this had the 2.4L do you know if it was different

[Silver 4 door]

just the cable. he broke the end off when doing his intake gaskets. I dont know if they are different on the 2.4ls. I never looked at one before.

[part-it-out]

ill just get a pic of mine for you and you can look at his and see if there the same i have no clue if they are the same or different or i bet some one on here would know

[loud2kse]

still no word back from you on the spindle

I'll take the a-arms too though. Both of them. And the spindle is what the end of the a-arms connect to that also connects to the axle and whatnot.

[bowanna03]

how about pass side mirror and outside door handle with lock cylinder how much and could you send some pics

[part-it-out]

no mirrors or front doors and i though i put the pic of that up here sorry guess i didnt ill get another pic of it cause its not saved on my computer any more and put that pic up here

but you want the drivers spindle and both A arms right? or did you want both spindles too?

[loud2kse]

both a arms, and just the drivers side spindle please

[Dave C]

sry, didn't want to read everything... if you still have any of the HVAC knobs, PM me I need one.

[part-it-out]

the heater and ac thing? i have one left but i dont know the shape of it and it has some thing broke off inside it $10 shipped as is though

[Dave C]

are you saying something is broke off inside the unit, or inside one of the knobs on the unit? I don't need the whole thing, just the knob(s) to adjust fan speed/temp/vent location. are they all in good shape / do you have any pictures?

[part-it-out]

inside the thing it self it was in the back seat of my parts car i got so im guessing its bad but the knobs look good yet i just wanna sell the whole thing cause im tired of looking at it lol but i can just sell the knobs to you if there good

[boltbusterdw]

Do you have 1 available and what would shipping cost to Wentzville, MO 63385?
boltbusterdw@msn.com

[part-it-out]

nope sorry traded the motor and tranny for a 2002 ninja 250 lol

[CeeMatt]

I can't believe this thread started so long ago. Any chance you have a 3400 plenum lying around?

[part-it-out]

nope i have a 3.1L out of a 1991 buick dont know if that would work in any of the grand ams but that car is getting junked soon any ways rusted out sub frame

and i still have lots more parts to sell i want every thing gone off this car pretty much

[loud2kse]

so what's up on the spindle and a-arms?

[part-it-out]

drivers side is all off passengers side is being a pain and i need to cut the bolt off

[part-it-out]

sent you a pm about the spindle

and heres the cruise cable

http://i26.tinypic.com/ogl3ps.jpg

http://i27.tinypic.com/ne7ouf.jpg

does it look the same?

[pont96gt]

how muc would you sell the gauge cluster bezel and radio bezel for??

[part-it-out]

gauge cluser bezel $25 raido i have 2 one is cracked theres pics some where on here of the crack $25 shipped it wont have the buttons in it

and the good one $30 shipped again wont have buttons in it

if you want the buttons add another $10

let me know

[Blackhawk]

You said you had no doors? tryin to get my car back together and I need the front passenger reflector for a 4 door, maybe both front reflectors cuz I'm taking the door panel off.

[Ralph]

do you have a stock 99-00 cd player?

[part-it-out]

no front doors

and its an aftermarket cd player

[sk8rjess]

how about headlights?

[s10drifter87]

do u have the ac pump thingy??? pm me

[part-it-out]

no head lights

and i dont have the motor so if the ac thing was on the motor (which im pretty sure it is) i dont have it but i still have the condenser thing

[TheTrader]

I need the door latch from inside the PASSENGER side front door, I actually only need the electronics part that is attached to the metal latch itself with some small hex screws.... how much shipped to Moncton, NB, Canada

postal code: E1C3H8

[part-it-out]

front doors are gone

i still have the rear doors though

[Dave C]

... HVAC knobs/unit ... can you post a picture?

[part-it-out]

working on getting pics up i took it apart and found a red thing in there it was plastic but didnt look like it came from that so i dont know how it got there

[hotrod6]

I sent you several pm's about the part i paid for,just wondering if you got it shipped out or whats going on..Thanks..Rodney

[part-it-out]

i sent you the tracking number for it check your pm box

[hotrod6]

i sent you the tracking number for it check your pm box

Got the tracking number.Thanks again..Awesome seller!!

[part-it-out]

http://i28.tinypic.com/72c6eb.jpg

http://i28.tinypic.com/331innm.jpg

http://i27.tinypic.com/211oto2.jpg

http://i31.tinypic.com/11jw4r7.jpg

ok here are the pics $10 shipped for the heater controllers and the knobs the one looks like some one got some pen on it but its still good yet and the heater/ac thing is as-is i dont know if it works it was in the back of my parts car

let me know dave c

[part-it-out]

still lots of parts left

[loud2kse]

any luck with the other a-arm?

If not just shoot me a price on that driver side spindle

[part-it-out]

right now i havnt had a chance to get out there but i did get my torches filled a couple days ago im about to cut every thing holding it on and let you worry about getting the bolts out without hurting the a arm or the bushings lol

[Mr03SC/T]

do you happen to have the center console cover? I am also looking for the left and right side trunk carpet.

[my94grandam]

is the hood still there

[part-it-out]

whats the center console cover? and yes i have the 2 sides carpet in the trunk

and hood is sold

[part-it-out]

still lots of parts there

knobs are sold the ac/heater unit still there

[part-it-out]

still lots of parts left going cheap

[AznGA]

Do you have the lower part of the stock intake (one by the fender area)?

[AznGA]

I sent you a PM!

[part-it-out]

responded back to the pm

[loud2kse]

payment sent for spindle

[cpt137]

I need this rubber strip, mine is folded under and can't get it back in place right. Right rear door, a seal that slides up a channeljust in front of the window.

[part-it-out]

i think i still have that $8 shipped