PDA

View Full Version : Dash


96 GA
01-15-2008, 01:07 PM
Does anybody know how many or where all the screws are to take off your dash?? Im wanting to paint my interior vents and ect.

RazorDX
01-15-2008, 01:48 PM
Do you need to take the entire dash out or just the bevel in the front/bottom?

If just the front/bottom piece, there are two underneath the stereo, and two around the gauge cluster. I may be way off though, I haven't taken it off in a while.

I do know that it is a pain in the arse to get the piece off around the wiper switch and turn signal switch. The steering wheel itself might also get in the way, but I don't recall from memory.

EDIT: I was pretty close. Follow the link for pics.
http://www.carstereohelp.com/stereoremovalPontiacGrandAm1StrR.htm

96 GA
01-15-2008, 02:07 PM
I need the entire dash off. When i put in my head unit I took that off and it was a pain but the vents are behind the other part of the dash.

Big Joe
01-15-2008, 06:10 PM
Those round vents just pull right out of the dash. Just Pull forward on them, be careful at the same time so you don't break anything.

96 GA
01-16-2008, 01:19 PM
Do you know where all of the screws are or how many of them there are though

96 GA
01-22-2008, 12:31 PM
So what kind of tool or what size of socket do i need to take of my dash?? I didnt think it would be near this difficult...??:???:

Big Joe
01-22-2008, 12:40 PM
I don't remember the bolt size off hand but you just need to unbolt everything and take off the steering wheel. Getting the wheel off is the hardest part but with a puller even thats not to difficult.