need help 00 pontiac grand prix

[bowanna03]

could anyone help me. need some detailed instructions on how to remove front wheel hub assembly on a 2000 grand prix pics would help thanks

[2K SE]

You're asking alot on a Grand Am board. Certainly can't do pics but I believe it is very similar to our cars.

Get the front tire off, pull the break caliper, bracket, and rotor, and the hub bolts should be visible. Remove those and the ABS sensor wires and you should be able to remove it.

Good luck and maybe someone has a GP and can explain better.

Opps, think I forgot about that big a$$ bolt, 36 mm on the GA. Get that loose before you jack up the car.

[cobrajeff92]

yea best way to do it is remove tire, brakes, all that stuff. remove your axel nut. romove the 4 hub bolts. pry it out be carfull though. tap the axel to get it loose from hub. after its out clean the surface up then reinstall. not that bad unless its a rusty mess.

[Nighthawk243]

PB Blaster is your friend

[cobrajeff92]

pb is alright i use this stuff called free all at my shop i like it a little better

[Deggy Fresh]

you would prob get better results from
http://www.clubgp.com/