PDA

View Full Version : block heater


poncho 1
02-11-2008, 07:49 PM
it's going to be really cold tonight i know the car will start in morning but is it better to plug in the block heater ? does it help the oil get around the motor faster so it's easier on the motor or is only help the coolent stay a little warm
thanks . p.s it's going to be -35 with the wind

jonnythan
02-11-2008, 08:26 PM
The wind chill is completely irrelevant. The engine will never get colder than the actual ambient temperature.

If you have a block heater, plug it in! It definitely helps.

tenspeed
02-11-2008, 08:59 PM
If you don't plug it in tonight, how cold does it have to get before you use it?

jonnythan
02-11-2008, 09:02 PM
If you don't plug it in tonight, how cold does it have to get before you use it?

:lol:

Canada, man..

poncho 1
02-11-2008, 09:06 PM
i just got back in from pluging her in and man it's cold
-22 no wind . we're used to it up here:) i just figured use it or lose it

edgrand03
02-17-2008, 07:57 PM
Do you have a plug in the block or on the oil pan? i don't understand which heater you're talking about. Btw where is the block plug for a heater anyways?

poncho 1
02-26-2008, 06:50 PM
it's beside the battery (plug) and it heat's the engine coolent (i think) not the cabin or in car heater, your from WI and have never heard of a block heater ?

tenspeed
02-26-2008, 09:39 PM
Btw where is the block plug for a heater anyways?

Factory installed heaters are usually in a freeze plug. JCWhitney sells aftermarket heaters that go in the coolant hose, dip stick or a plate that is stuck on the oil pan.

Blackhawk
02-27-2008, 08:24 PM
Jim, don't a few (or all) block heaters warm up the battery too?

tenspeed
02-27-2008, 08:34 PM
Jim, don't a few (or all) block heaters warm up the battery too?

Wouldn't those be battery heaters? ;)