Part Out! Custom headlights/taillights, 2.4 go fast parts, misc. stuff

[BadBlack00Ga]

Hey All,

Had an incident with my Grand Am almost a year ago now and have still been sitting on this huge pile of parts. Spring is rolling around and I'd like some cash for my new project (95' Eagle Talon TSi) Prices are pretty firm as everything is already priced to sell. If interested in more then one item we can work out some deals. All engine parts are for the 2.4 TC. Buyer is responsible for shipping costs!



Custom projector headlights. The ones built by mcgyver and then modified further by pyro. I bought these from pyro and didn't get a chance to put them on my car. There is a small crack in the housing of one of them that happened during shipping. Nothing a little bondo can't fix.
Headlights (http://www.fquick.com/garages/viewvehicle.php?id=1214)
(hope you don't mind me using your link pyro)
$350

Custom LED Tails. These were custom made by yours truly. There are 10 superflux LED's in each cluster for a total of 40. There is one small crack in the lens about 1 inch in length that was made while I was clearing them. These look badass and were my favorite visual mod I made to the car.

http://img137.imageshack.us/img137/4672/clayspics222js8.th.jpg (http://img137.imageshack.us/my.php?image=clayspics222js8.jpg)
http://img530.imageshack.us/img530/9636/pict0007od2.th.jpg (http://img530.imageshack.us/my.php?image=pict0007od2.jpg)
http://img521.imageshack.us/img521/981/pict0008tw7.th.jpg (http://img521.imageshack.us/my.php?image=pict0008tw7.jpg)
http://img338.imageshack.us/img338/2396/pict0000a11jw4.th.jpg (http://img338.imageshack.us/my.php?image=pict0000a11jw4.jpg)
Link to thread I made about them (http://www.grandamgt.com/forum/showthread.php?t=59960)
$250

PFYC Front and Rear STB's
Rear is black and front was red and then poorly painted black by previous owner. Front one could stand to be touched up
http://img120.imageshack.us/img120/3482/dsc0001cs7.th.jpg (http://img120.imageshack.us/my.php?image=dsc0001cs7.jpg)
$70 for both

Dual Aeroforce Interceptors w/ dual gauge pod, black faced w/ black/white screens. These are the earlier models without the shift light thingy.
$300

12" F-body Brake upgrade. Calipers, brackets, pads and rotors. Rotors have been sitting for a while and will need to be machined. 12", crossdrilled and cadmium coated. This setup was used on my car for less then 5,000km. This stuff cost me almost $1000, I don't expect many people to be interested in used brakes so thats why theyre priced so low.
http://img180.imageshack.us/img180/4453/dsc0384af5.th.jpg (http://img180.imageshack.us/my.php?image=dsc0384af5.jpg)
http://img513.imageshack.us/img513/1761/dsc0336uu5.th.jpg (http://img513.imageshack.us/my.php?image=dsc0336uu5.jpg)
$300 for everything

RSM/Z-spec ported intake manifold and TB. TB is hogged out to 63mm as measured by my caliper here at home. Manifold is port matched. Will separate if there is interest in both parts sepeartly, otherwise they're not worth much separated.
Its really dirty, but you get the idea.
http://img523.imageshack.us/img523/8067/dsc0002rp8.th.jpg (http://img523.imageshack.us/my.php?image=dsc0002rp8.jpg)
$200 for the pair

Brand New T3 Log style turbo manifold, no external W/G
$150

Brand New Garrett TB0359 Turbocharger. Nice, quick spooling turbo for a 2.4. .48 Turbine housing .42 Compressor housing. Internally Gated
$400

Stock headlights with black vinyl overlays, little hazy but not bad.
$40

Power 02.5-05 Side Mirrors (Mickey Mouse style)
$40

Manual (non-power) 99-02.5 Side Mirrors (dual post)
$40

White front plate filler with blue overlay
$15


GTS Blacked out headlight covers
$25

Stock Intake Manifold
$20

Stock TB w/ MAP sensor
$30

Cup-holder Ipod dock. This actually fits perfectly into the center vent holes and looks wicked in there. I wired in some blue LED's into the back of it so it glows a BRIGHT blue.
$20

http://img247.imageshack.us/img247/7883/clayspics227kh5.th.jpg (http://img247.imageshack.us/my.php?image=clayspics227kh5.jpg)
http://img179.imageshack.us/img179/4724/clayspics237vc4.th.jpg (http://img179.imageshack.us/my.php?image=clayspics237vc4.jpg)



I'll be adding more misc. stuff later on. Contact me via PM or e-mail me at claytonclancy@hotmail.com. Thanks for looking!

[Gagt518]

Do you know if the IPOD cup holder fit the new Nano's?

[BadBlack00Ga]

It held my 5g video and I believe it also fits the older versions, but not the nano, sorry.

[g4mbl3]

any pics of the tails at night on as well as day when off? and when the brake is applied, do both get brighter, or does only one, and do either strobe with the turn signals, or were the turn signals untouched? thanks

[BadBlack00Ga]

any pics of the tails at night on as well as day when off? and when the brake is applied, do both get brighter, or does only one, and do either strobe with the turn signals, or were the turn signals untouched? thanks

Updated my original post with more pics of the tails.

The way I had them wired in my car was outside clusters were brake, inside were turn signals, and both were parking lights. This is the simplest way to wire them as you can just cut the stock wires and match them up. If you want to make one or both of the clusters function as both a brake and a turn signal, you'll need a relay.

[AeR0]

hey where abouts are you located i am interested in the RSM/Z-spec ported intake manifold and TB

[BadBlack00Ga]

I'm in Mississauga.

[Nick_Wa]

pmed

[jcp420]

i will take those head light covers. how much shipping to 61910??

[BadBlack00Ga]

Bump!

All PM's and e-mails replied to!

[BadBlack00Ga]

New pics and more stuff!

Brand New T3 Log style turbo manifold, no external W/G
http://img232.imageshack.us/img232/7774/dsc0002wj6.th.jpg (http://img232.imageshack.us/my.php?image=dsc0002wj6.jpg)
$150

Brand New Garrett TB0359 Turbocharger. Nice, quick spooling turbo for a 2.4. .48 Turbine housing .42 Compressor housing. Internally Gated
$400
http://img177.imageshack.us/img177/5577/dsc0006yl6.th.jpg (http://img177.imageshack.us/my.php?image=dsc0006yl6.jpg)


Brand new in box Accel AFPR. Direct stock replacement with full adjustment from 30-70psi.
Link to Summit Racing (http://store.summitracing.com/partdetail.asp?autofilter=1&part=ACC%2D74565&N=700+115&autoview=sku)
http://img165.imageshack.us/img165/1166/dsc0001uk3.th.jpg (http://img165.imageshack.us/my.php?image=dsc0001uk3.jpg)
$70


Brand new in box NTK Oxygen Sensor, rear sensor.
$50

Brand new in box Rear Hub Assembly. National Hub Assemblies brand. This was the most expensive one I could get from my parts guy. I think I paid around $180.
$100

[BadBlack00Ga]

New Prices!


Custom projector headlights. The ones built by mcgyver and then modified further by pyro. I bought these from pyro and didn't get a chance to put them on my car. There is a small crack in the housing of one of them that happened during shipping. Nothing a little bondo can't fix. These include Bulbs and Ballasts! If no one buys them I'm gonna hack them up and use them on another project!
Headlights (http://www.fquick.com/garages/viewvehicle.php?id=1214)
(hope you don't mind me using your link pyro)
$325

Custom LED Tails. These were custom made by yours truly. There are 10 superflux LED's in each cluster for a total of 40. There is one small crack in the lens about 1 inch in length that was made while I was clearing them. These look badass and were my favorite visual mod I made to the car.
http://img137.imageshack.us/img137/4672/clayspics222js8.th.jpg (http://img137.imageshack.us/my.php?image=clayspics222js8.jpg)
Link to thread I made about them (http://www.grandamgt.com/forum/showthread.php?t=59960)
$200

PFYC Front and Rear STB's
Rear is black and front was red and then poorly painted black by previous owner. Front one could stand to be touched up
http://img120.imageshack.us/img120/3482/dsc0001cs7.th.jpg (http://img120.imageshack.us/my.php?image=dsc0001cs7.jpg)
$70 for both

Dual Aeroforce Interceptors w/ dual gauge pod, black faced w/ black/white screens. These are the earlier models without the shift light.
$270

12" F-body Brake upgrade. Calipers, brackets, pads and rotors. Rotors have been sitting for a while and will need to be machined. 12", crossdrilled and cadmium coated. This setup was used on my car for less then 5,000km. This stuff cost me almost $1000, I don't expect many people to be interested in used brakes so thats why theyre priced so low.
http://img180.imageshack.us/img180/4453/dsc0384af5.th.jpg (http://img180.imageshack.us/my.php?image=dsc0384af5.jpg)
http://img513.imageshack.us/img513/1761/dsc0336uu5.th.jpg (http://img513.imageshack.us/my.php?image=dsc0336uu5.jpg)
250 for EVERYTHING

RSM/Z-spec ported intake manifold and TB. TB is hogged out to 63mm as measured by my caliper here at home. Manifold is port matched. Will separate if there is interest in both parts sepeartly, otherwise they're not worth much separated.
Its really dirty, but you get the idea.
http://img523.imageshack.us/img523/8067/dsc0002rp8.th.jpg (http://img523.imageshack.us/my.php?image=dsc0002rp8.jpg)
$200 for the pair Tentatively Sold

Brand New T3 Log style turbo manifold, no external W/G
http://img232.imageshack.us/img232/7774/dsc0002wj6.th.jpg (http://img232.imageshack.us/my.php?image=dsc0002wj6.jpg)
$125

Brand New Garrett TB0359 Turbocharger. Nice, quick spooling turbo for a 2.4. .48 Turbine housing .42 Compressor housing. Internally Gated
$350
http://img177.imageshack.us/img177/5577/dsc0006yl6.th.jpg (http://img177.imageshack.us/my.php?image=dsc0006yl6.jpg)


Brand new in box Accel AFPR. Direct stock replacement with full adjustment from 30-70psi.
Link to Summit Racing (http://store.summitracing.com/partdetail.asp?autofilter=1&part=ACC%2D74565&N=700+115&autoview=sku)
http://img165.imageshack.us/img165/1166/dsc0001uk3.th.jpg (http://img165.imageshack.us/my.php?image=dsc0001uk3.jpg)
$70

Stock headlights with black vinyl overlays, little hazy but not bad.
$40

Power 02.5-05 Side Mirrors (Mickey Mouse style)
$40

Manual (non-power) 99-02.5 Side Mirrors (dual post)
SOLD

White front plate filler with blue overlay
$10


GTS Blacked out headlight covers
$20

Brand new in box NTK Oxygen Sensor, rear sensor.
$50

Brand new in box Rear Hub Assembly. National Hub Assemblies brand. This was the most expensive one I could get from my parts guy. I think I paid around $180.
$100

Stock Intake Manifold
$20

Stock TB w/ MAP sensor
$30

Cup-holder Ipod dock. This actually fits perfectly into the center vent holes and looks wicked in there. I wired in some blue LED's into the back of it so it glows a BRIGHT blue.
$20

http://img247.imageshack.us/img247/7883/clayspics227kh5.th.jpg (http://img247.imageshack.us/my.php?image=clayspics227kh5.jpg)
http://img179.imageshack.us/img179/4724/clayspics237vc4.th.jpg (http://img179.imageshack.us/my.php?image=clayspics237vc4.jpg)



I'll be adding more misc. stuff later on. Contact me via PM or e-mail me at claytonclancy@hotmail.com. Thanks for looking!

[Silver 4 door]

do you have or can get some close ups if the headlights, and are they tinted or is that a cover on them? Thanks

[BadBlack00Ga]

They are not tinted, nor is there a cover on them. The housing is black and it's got a clear lens.
http://img406.imageshack.us/img406/1682/dsc0003hy1.th.jpg (http://img406.imageshack.us/my.php?image=dsc0003hy1.jpg)

[BadBlack00Ga]

Not being able to edit my original post is making this difficult!

The following items are sold! STB's and brakes!

Projector Headlights are tentatively sold pending payment.

[Anniku989]

Can you get some pics of the $20 gts blacked out headlight covers?

[sudden_impulse]

Don't forget that the headlight covers are for 99+ GAs.

[Gagt518]

Headlights still forsale?

[Peyman]

somewhat interested in tail lights... can you please email me pictures of the 1" crack on the lenz?? is it plug and play?... are the turn signals LED as well?

[MXculture]

Im guessing that turbocharger wouldnt fit my 99 V6 3400 GAGT? If it would fit...that turbo would be mine.

[Gagt518]

Im guessing that turbocharger wouldnt fit my 99 V6 3400 GAGT? If it would fit...that turbo would be mine.

Nope its a direct swap. Just replace your air filter with the turbocharger













Im sorry i just had too :lol:

[Silver 4 door]

would you do 250 shipped to Saskatoon Sask for the headlights? and what temp are the bulbs?

[Gagt518]

I believe the headlights are now sold

[Silver 4 door]

well that sucks. I would get the tails if the tint could be taken off.

[Gagt518]

I could be wrong, but im pretty sure they were sold to a person over on GAGT.com

[Silver 4 door]

the headlights or the tails?

guy should update this then.

[roksoc]

any pics of the stock headlights?

[Gagt518]

I think the tails are still available

[GinoGrandAm]

what do you have left?

[matts]

ttt for my ecm

[jmanor]

How bout those strut bars still avail and shipping to zip 12209?

[GAGTKyle]

What's still for sale?

[BadBlack00Ga]

My apologies to everyone for not updating this.

Here is an updated list with sold parts.
New prices on almost everything that's still available.

The tails don't have any tint on them, the inside housing has been painted flat black.


Custom projector headlights. The ones built by mcgyver and then modified further by pyro. I bought these from pyro and didn't get a chance to put them on my car. There is a small crack in the housing of one of them that happened during shipping. Nothing a little bondo can't fix. These include Bulbs and Ballasts! If no one buys them I'm gonna hack them up and use them on another project!
Headlights (http://www.fquick.com/garages/viewvehicle.php?id=1214)
(hope you don't mind me using your link pyro)
SOLD

Custom LED Tails. These were custom made by yours truly. There are 10 superflux LED's in each cluster for a total of 40. There is one small crack in the lens about 1 inch in length that was made while I was clearing them. These look badass and were my favorite visual mod I made to the car.
http://img137.imageshack.us/img137/4672/clayspics222js8.th.jpg (http://img137.imageshack.us/my.php?image=clayspics222js8.jpg)
Link to thread I made about them (http://www.grandamgt.com/forum/showthread.php?t=59960)
$200

PFYC Front and Rear STB's
Rear is black and front was red and then poorly painted black by previous owner. Front one could stand to be touched up
http://img120.imageshack.us/img120/3482/dsc0001cs7.th.jpg (http://img120.imageshack.us/my.php?image=dsc0001cs7.jpg)
SOLD

Dual Aeroforce Interceptors w/ dual gauge pod, black faced w/ black/white screens. These are the earlier models without the shift light.
$250

12" F-body Brake upgrade. Calipers, brackets, pads and rotors. Rotors have been sitting for a while and will need to be machined. 12", crossdrilled and cadmium coated. This setup was used on my car for less then 5,000km. This stuff cost me almost $1000, I don't expect many people to be interested in used brakes so thats why theyre priced so low.
http://img180.imageshack.us/img180/4453/dsc0384af5.th.jpg (http://img180.imageshack.us/my.php?image=dsc0384af5.jpg)
http://img513.imageshack.us/img513/1761/dsc0336uu5.th.jpg (http://img513.imageshack.us/my.php?image=dsc0336uu5.jpg)
SOLD

RSM/Z-spec ported intake manifold and TB. TB is hogged out to 63mm as measured by my caliper here at home. Manifold is port matched. Will separate if there is interest in both parts sepeartly, otherwise they're not worth much separated.
Its really dirty, but you get the idea.
http://img523.imageshack.us/img523/8067/dsc0002rp8.th.jpg (http://img523.imageshack.us/my.php?image=dsc0002rp8.jpg)
$200 for the pair Tentatively Sold

Brand New T3 Log style turbo manifold, no external W/G
http://img232.imageshack.us/img232/7774/dsc0002wj6.th.jpg (http://img232.imageshack.us/my.php?image=dsc0002wj6.jpg)
$110

Brand New Garrett TB0359 Turbocharger. Nice, quick spooling turbo for a 2.4. .48 Turbine housing .42 Compressor housing. Internally Gated
$300
http://img177.imageshack.us/img177/5577/dsc0006yl6.th.jpg (http://img177.imageshack.us/my.php?image=dsc0006yl6.jpg)


Brand new in box Accel AFPR. Direct stock replacement with full adjustment from 30-70psi.
Link to Summit Racing (http://store.summitracing.com/partdetail.asp?autofilter=1&part=ACC%2D74565&N=700+115&autoview=sku)
http://img165.imageshack.us/img165/1166/dsc0001uk3.th.jpg (http://img165.imageshack.us/my.php?image=dsc0001uk3.jpg)
$60

Stock headlights with black vinyl overlays, little hazy but not bad.
$35

Power 02.5-05 Side Mirrors (Mickey Mouse style)
$35

Manual (non-power) 99-02.5 Side Mirrors (dual post)
SOLD

White front plate filler with blue overlay
$10


GTS Blacked out headlight covers
$20

Brand new in box NTK Oxygen Sensor, rear sensor.
$50

Brand new in box Rear Hub Assembly. National Hub Assemblies brand. This was the most expensive one I could get from my parts guy. I think I paid around $180.
$80

Stock Intake Manifold
$20

Stock TB w/ MAP sensor
$30

Cup-holder Ipod dock. This actually fits perfectly into the center vent holes and looks wicked in there. I wired in some blue LED's into the back of it so it glows a BRIGHT blue.
$20

http://img247.imageshack.us/img247/7883/clayspics227kh5.th.jpg (http://img247.imageshack.us/my.php?image=clayspics227kh5.jpg)
http://img179.imageshack.us/img179/4724/clayspics237vc4.th.jpg (http://img179.imageshack.us/my.php?image=clayspics237vc4.jpg)

[BadBlack00Ga]

somewhat interested in tail lights... can you please email me pictures of the 1" crack on the lenz?? is it plug and play?... are the turn signals LED as well?


If you're still interested in pics, lets me know. The crack is barely noticable, so much so I'll have trouble taking a pic of it.

These are not plug and play, they'll need to be wired into the factory harness, which is alot easier then it sounds. Connect red wire to red wire, black wire to black wire, etc. There's a thread on GAGT.com that tells which colored wires are for which turn signal etc.

The turn signals are also LED, but they are in the main brake light housing now, the stock turn signal location has been covered with vinyl.

[sly fox]

I would like to get the side mirrors if they are still available, pm me so we can make arragements

[FromTheInside]

If you're ever thinking of selling a leather wrapped steering wheel, shifter knob, or e-brake handle, please PM me!!!
(the steering wheel must have radio controls)