LS1 Injectors

[TurboGAT]

Does anyone know if the stock GA injector plugs fit to a stock GM LS1 injector? I have the injectors but not a GA anymore and im looking to get rid of them but want to make 100% sure they fit.

Thanks,

Brian

[KhellendrosXS]

Post up a pic of them so we can see what the connector looks like.

[TurboGAT]

ok i will post them up later tonite when i get home.

Thanks,

Brian

[TurboGAT]

here are the pics.....thanks for the help

im almost 100% sure they fit i just want to make sure

[KhellendrosXS]

Those will probably clip into a rail from 99 or 00 but they dont look anything like the connectors on the 01+ rail. Thats not to say that the rails cant be modified to accept them though. Ill take a closer look at my old stockers in the morning to make sure of that though.

Whats the flow rating?

[TurboGAT]

26lb/hr.....thanks man

-Brian

[KhellendrosXS]

Regardless of whether the clips are the correct fit, the flow rating is not going to be delivering accurately on any 99+ grand am without the PCM being reprogrammed. The 99 and 00 have 19lb/hr injectors and the 01+ have 22.5 lb/hr injectors. I cant speak for the clips on the 99/00 fuel rail but these do not look at all like the plugs on the 01+ rails. Thats not to say they cant be made to work with some soldering but as far as them being direct swap I dont think they are.

To solder them on a person would need the clips from wherever these came from and then cut the old clips off the fuel rail and solder on the new injector clips. If you have those and someone who is willing to hack the injector harness up a bit then they could be made to work.

[TurboGAT]

yea its not really worth doing all that work for injectors when you can buy ones that will fit

Thanks for all your help

-Brian