Camaro Z and S/C Goat

[3 DeeJay]

Been forever since I've been on and thought I'd pop up.. Give updates.. My camaro will be playing at the track SOON!! I'd like to dyno it and have my struts adjusting.

http://img.photobucket.com/albums/v238/deejay02/camgto02.jpg
http://img.photobucket.com/albums/v238/deejay02/camgto03.jpg
http://img.photobucket.com/albums/v238/deejay02/camgto04.jpg
http://img.photobucket.com/albums/v238/deejay02/camgto05.jpg
http://img.photobucket.com/albums/v238/deejay02/camgto06.jpg
http://img.photobucket.com/albums/v238/deejay02/camgto07.jpg
http://img.photobucket.com/albums/v238/deejay02/camgto08.jpg

got bored..

http://img.photobucket.com/albums/v238/deejay02/th_Picture023.jpg (http://smg.photobucket.com/albums/v238/deejay02/?action=view&current=Picture023.flv)
http://smg.photobucket.com/albums/v238/deejay02/?action=view&current=Picture023.flv

http://img.photobucket.com/albums/v238/deejay02/gto2.jpg
http://img.photobucket.com/albums/v238/deejay02/gto1.jpg
http://img.photobucket.com/albums/v238/deejay02/motor1.jpg

blower install is going good.. picking up some headers hopefully here soon too.. and a off road mid pipe.. looking to hit close to 500hp out of the goat..

[Silver 4 door]

WOW you gots some money! what all have you done to the maro? I have a 95z28 with a 383 and a custom turbo set up the I have been working on for 5 years. hoping to get 1200 hp with 30 to 32 psi.

love the Goat too man.

[Gagt518]

Looking/Sounding good!

Let's see some engine shots :thumbup2:

[3 DeeJay]

most of the camaro mods...

Meizure Electric Drag Race Pump
Afco Front Shocks
PA-Racing K-Member and A-Arms
Convo Pros(welds)
Kirkey Racing Seats w/ Black Covers
Manual Brake Cylinder
Eldebrock Stainless Steel Stepped Headers
with 3 ½ in collectors
Has 3 ½ inch spiral flow mufflers the slip on collectors.
Spiral Flows have turndowns welded to them
Heater/AC Removed
Moser 9 inch rear end
Narrowed 1.5 inches on each side
Nodular Center Housing
Aluminum Spool
Moser Yoke
4.10 gears
31 Spline Moser Axles
4 channel ABS ready
3 inch Balanced Chromoly Drive Shaft for shorter Moser Yoke
Alston Torque Arm
Trackbird Heim Jointed LCA's
Spohn 25mm Rear Sway Bar
99 + Fuel "bucket" with 255 Walbro
LS6 Intake

I'm sure I've missed a few things... Still have stock heads and cam.. I have a wet nitrous system hooked up, but can't spray until I have it returned because my rev limited it set way too low and my nitrous will not shut off till 6000rpms..

http://img.photobucket.com/albums/v238/deejay02/dragz04.jpg

http://img.photobucket.com/albums/v238/deejay02/dragz10.jpg

http://img.photobucket.com/albums/v238/deejay02/dragz08.jpg

here's a youtube of my last run with the Z28 with a 5000 rev limiter and babying it off the line..
http://youtube.com/watch?v=UTpwPjQsFnU

[Silver 4 door]

Nice man. Cant wait to see that thing run with the limiter raised.

[ManktheTank19]

Very nice rides - I am more interested in the Goat

[car audio dave]

very nice. very nice.

both cars are bad ass, but you need to wash them now.

im so tempted to get a camaro shell and build up an LSX block for it. i think all thats holding me back is lack of money. :D

[3 DeeJay]

yeah, my dad gripes at me every day for not spending the money on a bigger motor for the camaro and wasting it on supercharging the GTO.. I just don't want to do anything more with the Camaro right now..

[ramairgt1]

I'm surprised you are only looking at 500hp with a blown goat..i figured it would be a bit higher...assuming you are referring to rwhp

[3 DeeJay]

The maggie isn't really the way to go if i wanting to hit some really good numbers.. I mostly wanted it because its my DD and I don't want to spend money building a bottom end and other supporting mods for past 500.. I missed the whine and the torque of the 03 Cobra I had so the maggie is pretty similar to a eaton..

http://img.photobucket.com/albums/v238/deejay02/th_DSCI0080.jpg (http://smg.photobucket.com/albums/v238/deejay02/?action=view&current=DSCI0080.flv)
05/06 SLP LM1 catback modified to fit an 04

[car audio dave]

yea, that twin turbo kit (APS i think is who makes it) is soooo sick, but ive seen it tear apart the LS2, let alone the LS1. nothing wrong with a 500hp DD. :D

[Bouchie11982]

:leghump: :drool: