6x9's hook up

[vick_794]

I wanna hook up my Rockford Fosgate T1693C 6x9's.I wanna hook them up with the connection thing below that came with my GA.The factory 6x9's had 2 neg/pos post for hook up.I believe the T1693C only has one hook up post.How would i got about hooking them up.Do i jus hook up one set of pos/neg...Could have asked both my questions in same theard....my bad
http://www.rockfordfosgate.com/products/photos/T1693C_3_m.jpg
http://i29.photobucket.com/albums/c288/vick_794/04-14-08_1258.jpg

[vega850]

just hook one up and tape the other

[vick_794]

I knew that i was jus tryna see if ya'll knew to do that haha...j/k...but i didn't know if that was gonna stop it from getting full power? or something.Thankz

[vega850]

nope

[speedemon77]

one set is for the highs and one is for the lows dude just splice them together i ran a rf box off my stock head unit and ran the lows to the subs and highs to the speakers

[vick_794]

one set is for the highs and one is for the lows dude just splice them together i ran a rf box off my stock head unit and ran the lows to the subs and highs to the speakers

So what ya u mean...for example wit the neg.

put the lows and highs from neg together.then connect them speaker port with the neg wire ?....

[sudden_impulse]

Do you have subs in your car? I can't remember, but if you want low notes, find the pair of wires that give the speakers lower notes, if you want higher notes, hook those wires up. Don't get the sides mixed up, otherwise it'll make it harder to put the pos. and neg. together correctly.

[vick_794]

I have a Rockford fosgate P2 12 running off an SPL 400w amp

[sudden_impulse]

Alright, just try hooking the wires up like I described, depending on the sound you want. With subs, some people just disconnect the back speakers completely.

[vick_794]

The guy at Audio Plus had the 6x9's playing the lows with the sub.I knew when they blowed because it sounded a lil bit diff.....I had already take n my 6x9's out along wit the connector thing but I ended up finding out which was which.Got the highs end taped off so it'll be easier and ready when i put the new ones end. thankz fo the help cuz most likely i prob would have messed up something haha...

[dandragonrage]

one set is for the highs and one is for the lows dude just splice them together

Great way to kill your amp.

[vick_794]

I don't know if it all ends back up to my amp but my reg. speakers r still hooked up to my HU and not directly to my amp.

[speedemon77]

Great way to kill your amp.

how will that kill your amp i've had mine hooked up that way for 3 years now no problems i replaced my rear 6x9's with some 3 way pioneers and ran a rf box split off the speaker wires for the subs i have a 760 watt amp with a compaciter so my lights don't dim sounds damn good with the stock head unit

[vick_794]

http://a545.ac-images.myspacecdn.com/images01/27/l_3e9a4846940088e7f87cb3233641d488.jpg
http://a407.ac-images.myspacecdn.com/images01/115/l_7f3aaf663abe4e961f1906678ab8dd2e.jpg

[sokapop]

Which wires go to the lows? The longer wires or the shorter ones?

[vick_794]

Which wires go to the lows? The longer wires or the shorter ones?

The shorter one...

i'll check again in the morning to make sure i'm 100% right....