my new (to me) pick 'em up truck

[antirice]

here's my '89 GMC 1/2 ton, its gonna need some body work, but I can handle it

http://images.cardomain.com/member_img_a/305000-305999/305483_33_full.jpg

first thing to go, is the cap, being replaced by a Gaylords hard tonneau, then rimz and lowering, and tinted windows and new paint, and then some dress up stuff

[Jibo]

Originally posted by antirice
here's my '89 GMC 1/2 ton, its gonna need some body work, but I can handle it

http://images.cardomain.com/member_img_a/305000-305999/305483_33_full.jpg

first thing to go, is the cap, being replaced by a Gaylords hard tonneau, then rimz and lowering, and tinted windows and new paint, and then some dress up stuff

Nice truck, did you get rid of the GA?

[antirice]

naw, I need to replace the ball joints and do another couple repairs before I can sell it, so I'm gonna hold on to it for a little while, she'll be taken off the road and the ins. transferred to the GMC

[martopg]

Originally posted by antirice
here's my '89 GMC 1/2 ton, its gonna need some body work, but I can handle it

http://images.cardomain.com/member_img_a/305000-305999/305483_33_full.jpg

first thing to go, is the cap, being replaced by a Gaylords hard tonneau, then rimz and lowering, and tinted windows and new paint, and then some dress up stuff

You're gonna lower it??? :shake: :no: :crazy: :cuss:

sorry not a big fan of beefy trucks being reduced to pussy street-lovin cars... :shrug:

[Artic]

Looking good timmy slam that baby :)

[antirice]

Originally posted by martopg
You're gonna lower it??? :shake: :no: :crazy: :cuss:

sorry not a big fan of beefy trucks being reduced to pussy street-lovin cars... :shrug:

my thought is, its a 2 wheel drive, it takes too much work to lift one (unless I get the Fabtech kit...Uber expensive), and nobody has lowriders around here, so I thought it would look good lowered with an escalade front clip

[martopg]

Originally posted by antirice
my thought is, its a 2 wheel drive, it takes too much work to lift one (unless I get the Fabtech kit...Uber expensive), and nobody has lowriders around here, so I thought it would look good lowered with an escalade front clip

ah geez... i guess. I think it's a little too big to be lowered and actually look decent... imho

[ldrhoa]

Lower it! Stick with some classy rims, like the TorqThrust II's, though. No gawdy 20's please.

[antirice]

Originally posted by ldrhoa
Lower it! Stick with some classy rims, like the TorqThrust II's, though. No gawdy 20's please.

now you've got taste, I was thinking the same thing 17" Torq Thrust's, now I've just got to get the dang thing, State Farm is trying to screw us over with the house ins and we're gonna switch everything insured over to another company, so I have to wait until then to get it

[antirice]

http://images.cardomain.com/member_img_a/404000-404999/404608_1_full.jpg
http://images.cardomain.com/member_img_a/404000-404999/404608_2_full.jpg http://images.cardomain.com/member_img_a/404000-404999/404608_4_full.jpg http://images.cardomain.com/member_img_a/404000-404999/404608_5_full.jpg http://images.cardomain.com/member_img_a/404000-404999/404608_6_full.jpg
http://images.cardomain.com/member_img_a/404000-404999/404608_7_full.jpg
http://images.cardomain.com/member_img_a/404000-404999/404608_8_full.jpg
http://images.cardomain.com/member_img_a/404000-404999/404608_9_full.jpg
http://images.cardomain.com/member_img_a/404000-404999/404608_10_full.jpg
http://images.cardomain.com/member_img_a/404000-404999/404608_11_full.jpg
http://images.cardomain.com/member_img_a/404000-404999/404608_12_full.jpg

[RocketFast321]

My dad has the same speed-o on his truck, it funny to watch it once it goes over 85

[martopg]

Oh man... that engine bay reminds me of our 89 Dakota... we had to eBay that poor thing after an engine swap gone awry... :cry:

[antirice]

well, my sites up

http://www.cardomain.com/id/antirice_sierra