Project Frankendime - Alive again - Page 10

**ga5speed02** · 07-26-2010, 08:08 PM

Quote:

Originally Posted by TA^Guy

Thanks. I'm going to mold the vents, I'd like to keep them fuctional. We carefully removed the vinyl around the vents so the shape of the foam stayed intact. Any air gauges I install will go in to the center console.

you can still keep it functional. i meant mold the edges in and use the openings. or glass over the whole thing and make your own 'slits' or 'holes' in it. this way the center vent wont looks like a separate piece

Quote:

Originally Posted by photogirl12

**sigh** The bike incident. I got photos of that, too!

Joe looks like you did a good job holding down the cooler while John did all the work.

**Big Joe** · 07-26-2010, 08:27 PM

Quote:

Originally Posted by ga5speed02

Joe looks like you did a good job holding down the cooler while John did all the work.

well I didn't break the dam bike, if the cooler would have broke I would have fixed it.

**ga5speed02** · 07-26-2010, 08:41 PM

Quote:

Originally Posted by Big Joe

well I didn't break the dam bike, if the cooler would have broke I would have fixed it.

I figured you where holding it down so it didn't float away LOL

Jean-Seb · 07-26-2010, 08:47 PM

Oh lord.

You guys seem to have had a good time lol. Loving the progress too.

**TA^Guy** · 07-26-2010, 10:34 PM

Quote:

Originally Posted by ga5speed02

you can still keep it functional. i meant mold the edges in and use the openings. or glass over the whole thing and make your own 'slits' or 'holes' in it. this way the center vent wont looks like a separate piece.

Oh, are you talking about the defroster vent? No that isn't getting glassed. Need to get under for mounting screws.

ramairgt2 · 07-26-2010, 10:52 PM

looks awesome guys! I can't wait to see this transform

**ga5speed02** · 07-27-2010, 06:47 AM

Quote:

Originally Posted by TA^Guy

Oh, are you talking about the defroster vent? No that isn't getting glassed. Need to get under for mounting screws.

yea thats what i meant. ok, i wasnt sure how you were planning on mounting it.

**Big Joe** · 07-27-2010, 02:44 PM

Quote:

Originally Posted by ga5speed02

i wasnt sure how you were planning on mounting it.

You mount the women, son.

95blackz26 · 07-27-2010, 03:07 PM

Quote:

Originally Posted by Big Joe

You mount the women, son.

so ive been doing it wrong all these years.

dash looks like it will fit in good inside the truck.

**GregFarz78** · 07-28-2010, 06:21 AM

Quote:

Originally Posted by TA^Guy

Well, I am thinking of making it a motorized compartment for a playstation. Maybe use one of those window motors from the caravans. I perfer a caravan without a huge turd under the seat too. So while at the yard in a few weeks I'm going to grab a airbag cover, some window motors, dash vents, etc.

Mounting some gauges there and angling them towards the driver would be cool too, or mount the head unit there and it hides away when you shut the car off

When is fiberglass day during the albany meet?

**ga5speed02** · 07-28-2010, 06:39 AM

Quote:

Originally Posted by Big Joe

You mount the women, son.

ima take ole one eye to the optometrist

**TA^Guy** · 07-28-2010, 11:24 AM

Quote:

Originally Posted by GregFarz78

Mounting some gauges there and angling them towards the driver would be cool too, or mount the head unit there and it hides away when you shut the car off

When is fiberglass day during the albany meet?

Yeah that's an ideal too. I'm not a big gamer so the Playstation was only an idea because I have had one for about 7 years thats only been used about a dozen times. So I figured it's jsut sitting around the house not being used, why not? lol

Hey we can do fiberglassing any day you'd like, I'll bring an extra pair of gloves for you.

**Big Joe** · 07-28-2010, 11:11 PM

Quote:

Originally Posted by GregFarz78

When is fiberglass day during the albany meet?

As long as I'm there, everyday is fiberglass day. You need something done?

**GregFarz78** · 07-29-2010, 08:34 AM

I was talking about john's dash but I was thinking of doing a small fiberglass sub enclosure in my trunk

**ga5speed02** · 08-02-2010, 10:42 PM

John, any updates so far from the dash project. im stoked to see this thing

**TA^Guy** · 08-03-2010, 12:55 PM

Quote:

Originally Posted by ga5speed02

John, any updates so far from the dash project. im stoked to see this thing

Nothing yet, few more days I'll be back in to it. I have to get up ultra early tomorrow to drop my daughter off at the airport. Then I will be away this weekend at the truck nats. BTW if you are going I am meeting Steve at gate 3 at 10am. Or if you are taking the same route as I would be from Joes house we can meet up on the road somewhere.

PontiacGT201 · 08-03-2010, 02:05 PM

haha Great pics.

**ga5speed02** · 08-03-2010, 04:11 PM

Ill see you at nats on Saturday

garrettse · 08-13-2010, 01:37 AM

i'm an impatient little punk, any updates? probably time for me to start a project I guess

**TA^Guy** · 08-14-2010, 01:03 PM

Quote:

Originally Posted by garrettse

i'm an impatient little punk, any updates? probably time for me to start a project I guess

No I was away last weekend, during the week I have a damaged car to repair from my journey last weekend, next weekend is the Albany meet that I am also getting ready for during the week.

BUSY BUSY BUSY

But I did pick up my new audio/video equipment.

Thanks Steve!

07-26-2010, 08:47 PM	#184
Jean-Seb ... Joined: Jul 07, 2007 Member Number: 21876 Location: Alberta, Canada Vehicle Information: 1995 Pontiac Grand Am SE Engine: 2.3L Quad4 5-speed Odometer: 201,500 KM 1999 GMC Yukon SLT Engine: 5700 Vortec V8 Odometer: 460,200 KM	Oh lord. You guys seem to have had a good time lol. Loving the progress too. __________________

07-26-2010, 10:52 PM	#186
ramairgt2 I can lean too ;) Joined: Jan 24, 2003 Member Number: 121 Location: Racine,WI Name: Rollin Age: 28 Sex: M Vehicle Information: 1997 Pontiac GP soon 2B a whiner! SE Engine: 3800 V6	looks awesome guys! I can't wait to see this transform __________________

07-29-2010, 08:34 AM	#194
GregFarz78 2 2000s Joined: Aug 31, 2006 Member Number: 16774 Location: Philly,PA Name: Greg Age: 31 Sex: M Vehicle Information: 2004 Honda S2000 Engine: 2.2L Odometer: 20,000 Mi 1986 Mazda B2000 GTR Engine: 2.0L Odometer: 1,000 Mi	I was talking about john's dash but I was thinking of doing a small fiberglass sub enclosure in my trunk __________________ My Pics \| Mazda B2000 Project\| Nissan 350SX Project (Sold)

08-02-2010, 10:42 PM	#195
ga5speed02 Club ECM Joined: Feb 01, 2003 Member Number: 555 Location: Bucks County PA Name: MAD MIKE Age: 32 Sex: M Vehicle Information: 2001 Grand Am GT Engine: 3.4L SFI	John, any updates so far from the dash project. im stoked to see this thing __________________ Desperation Is A Stinky Cologne.

08-03-2010, 04:11 PM	#198
ga5speed02 Club ECM Joined: Feb 01, 2003 Member Number: 555 Location: Bucks County PA Name: MAD MIKE Age: 32 Sex: M Vehicle Information: 2001 Grand Am GT Engine: 3.4L SFI	Ill see you at nats on Saturday __________________ Desperation Is A Stinky Cologne.

08-13-2010, 01:37 AM	#199
garrettse needs more glow Joined: Jan 15, 2009 Member Number: 29175 Location: utah Name: Garrett Age: 19 Sex: M Vehicle Information: 2000 mercury cougar Engine: 2.0l zetec	i'm an impatient little punk, any updates? probably time for me to start a project I guess __________________ 2000 mercury cougar 1994 GAGT shauntell rip 2010 still got her cleared tail lights pm for details