2.4 Cai - Page 2

litdevil316 · 02-28-2007, 10:11 PM

matt, is that a custpm one or is it a kit? if so whos kit? and if its custom made, they did a pretty good job.

urweak · 02-28-2007, 10:17 PM

is that an ID intake or your own.

matt rupke · 02-28-2007, 11:27 PM

induction dynamics, got it from someone on quad4forums who was parting out his mods. got it for $80, way better than the 300 from the site

litdevil316 · 02-28-2007, 11:29 PM

nice deal man. looks like it might even be able to be modded to fit on the GM spec s/c.....

matt rupke · 02-28-2007, 11:45 PM

possibly, im gona try to see if i can mod it to fit with my turbo set up that will hopefully happen this summer. if not ill just sell it on here

litdevil316 · 03-01-2007, 12:05 AM

i'd be tempted to check into it. lol any idea how much? lol

litdevil316 · 03-01-2007, 12:08 AM

matt, i saw on your cardomain your waiting to install the turbo and all, hows that going along? got pics of it if its already done?

urweak · 03-01-2007, 01:51 AM

Quote:

Originally posted by matt rupke
possibly, im gona try to see if i can mod it to fit with my turbo set up that will hopefully happen this summer. if not ill just sell it on here

it wouldnt work, or atleast it would be easier to sell that and make a new intake since your intake will be running to the back of the motor were the turbo is going to be.

Quote:

Originally posted by litdevil316
nice deal man. looks like it might even be able to be modded to fit on the GM spec s/c.....

Yea it should, it fit on darkfoxs car when he had the HO manifold, and if you look at matts (S/C 95) car his intake setup is similar. And i think ive seen j-bodys run the intake on their GM supercharged cars.

matt rupke · 03-01-2007, 02:30 AM

Quote:

Originally posted by litdevil316
matt, i saw on your cardomain your waiting to install the turbo and all, hows that going along? got pics of it if its already done?

no its not in yet, as i stated above i hope to get it done this summer, ill definetly be posting pictures when its done

Quote:

Originally posted by urweak
it wouldnt work, or atleast it would be easier to sell that and make a new intake since your intake will be running to the back of the motor were the turbo is going to be.
[/B]

yeah, if i do use it for it i would have to get a new pipe to come from the turbo inlet to the S pipe about the battery, but ill find that out when i install everything.

urweak · 03-01-2007, 06:09 AM

Quote:

Originally posted by matt rupke
yeah, if i do use it for it i would have to get a new pipe to come from the turbo inlet to the S pipe about the battery, but ill find that out when i install everything.

yea, so your better off just doing all new pipe, and getting it all powder coated with your new charger pipes and all that. Plus im sure you could sell that intake for $100+

litdevil316 · 03-01-2007, 08:03 AM

100 probley wouldnt be too bad for it. ya say the site has it for 300.. damn that. lol. as far as your inter cooler, have you thought of a place to put it? i had been thinking that about my car since i was thinking about the RSM sc kit at first, that one could use the intercooler if you get the boost high enuff. thing is i dont really wanna cut up my bumber and i havent found a fit i like. but i have found a spot that could work and has the room, tho might need a lil mod'ing. right in front of the radiator. of course, thats with the AC condensor removed. i removed all my ac crap('cept whats in the dash) and it freed up alot of room in front of the radiator. heres a couple good pics of what i'm talking about... (more pics in my yahoo link)

with out oilcooler..

and theres the oilcooler...

matt rupke · 03-01-2007, 09:31 AM

Quote:

Originally posted by litdevil316
100 probley wouldnt be too bad for it. ya say the site has it for 300.. damn that. lol. as far as your inter cooler, have you thought of a place to put it? i had been thinking that about my car since i was thinking about the RSM sc kit at first, that one could use the intercooler if you get the boost high enuff. thing is i dont really wanna cut up my bumber and i havent found a fit i like. but i have found a spot that could work and has the room, tho might need a lil mod'ing. right in front of the radiator. of course, thats with the AC condensor removed. i removed all my ac crap('cept whats in the dash) and it freed up alot of room in front of the radiator.

i plan on putting just about everything were bobgagt had it, since most the major parts are from his setup. there are some pictures somewhere on here.

should probably get back on topic before we get locked

litdevil316 · 03-01-2007, 10:04 AM

NYC ICE · 03-01-2007, 04:02 PM

When you say sharp corners reduce HP, yes thats correct some things are unavoidable. Where all my connections of the tubes come together there is a gasget on the inside and its smoothed out so the air flow is not interupted. When I assembled the WAI I made sure of this and did one gasget at a time and built from one side to the other to insure I could make it as smooth as possible. For a custom build i would say its good enough for the price i spent on the parts.

litdevil316 · 03-01-2007, 07:14 PM

i'l sure agree with ya there Ben.jus take a look at jerry-rigged intake. lol. tho i'l be the first to admit the flex tube has to go. but if i do get the SC, it'll go anyway.

bballr4567 · 03-01-2007, 07:26 PM

Quote:

Originally posted by litdevil316
i'l sure agree with ya there Ben.jus take a look at jerry-rigged intake. lol. tho i'l be the first to admit the flex tube has to go. but if i do get the SC, it'll go anyway.

X2!!! You got that awesome ass car and then that horrible intake!! HAHA Messing with ya bro.

litdevil316 · 03-01-2007, 07:29 PM

and to think i actually washed it yesterday....

NYC ICE · 03-01-2007, 08:14 PM

yeah, if you havent seen a 5speed 2.4 grand am done up nice its on street fire heres the link. http://videos.streetfire.net/search/...740061d46d.htm

bballr4567 · 03-01-2007, 08:15 PM

^ That car has been repainted and looks amazing now. Go to GAGT forums and check out the user spyhunter.

litdevil316 · 03-01-2007, 08:21 PM

dayyyyyyum. lol. havent seen Spy in a while. does he ever use goac anymore?

02-28-2007, 10:11 PM	#21
litdevil316 101st Parkinglot RANGER!! Join Date: May 03, 2003 Member Number: 1932 Location: hagerstownMD/fortcampbellKY Name: Nick Age: 27 Sex: M Model Year: 97 Car: pontiac Grand Am xSE Engine: 2.4L tc (+0.020over)	matt, is that a custpm one or is it a kit? if so whos kit? and if its custom made, they did a pretty good job. __________________ 1997 Grand Am SE Bloack Coupe 17"rims BFG gforceTAsKDWs -RSM 62TB w/ported mani;JBodyPerf p/p head,perf cams;header:BremboRotors-HawkHPS-pads -RSM front STB; B&G 1.6drop/KYBs-MagnaFlow muffler,2.5" exhaust, MSDcoil Cnvrsn 2005 GMC Canyon crewcab z71-4x4 3.5L I5 MY Cardomain My MySpace My PhotoBucket *2009 HarleyDavidson Sportster 883 Custom

02-28-2007, 10:17 PM	#22
urweak R.I.P Join Date: Jul 16, 2003 Member Number: 2702 Location: Pittsburgh Pa Age: 26 Model Year: 1997 Car: Pontiac Grand Am SE Engine: 2.4L TWIN CAM Best ET: 16.045@86.56	is that an ID intake or your own. __________________ "I wish my grass was emo, so it would cut itself."

02-28-2007, 11:27 PM	#23
matt rupke Got Boost? Join Date: Aug 06, 2005 Member Number: 11641 Location: Gibsonburg OH Name: matthew Age: 21 Sex: M Model Year: 1994 Car: toyota supra TT Engine: 3.0 I6 Twin Turbo	induction dynamics, got it from someone on quad4forums who was parting out his mods. got it for $80, way better than the 300 from the site __________________ 94 Supra 6 speed Twin turbo: 496 RWHP 01 zx-12r = stupid fast 96 GAse 2.4 = winter beater

02-28-2007, 11:29 PM	#24
litdevil316 101st Parkinglot RANGER!! Join Date: May 03, 2003 Member Number: 1932 Location: hagerstownMD/fortcampbellKY Name: Nick Age: 27 Sex: M Model Year: 97 Car: pontiac Grand Am xSE Engine: 2.4L tc (+0.020over)	nice deal man. looks like it might even be able to be modded to fit on the GM spec s/c..... __________________ 1997 Grand Am SE Bloack Coupe 17"rims BFG gforceTAsKDWs -RSM 62TB w/ported mani;JBodyPerf p/p head,perf cams;header:BremboRotors-HawkHPS-pads -RSM front STB; B&G 1.6drop/KYBs-MagnaFlow muffler,2.5" exhaust, MSDcoil Cnvrsn 2005 GMC Canyon crewcab z71-4x4 3.5L I5 MY Cardomain My MySpace My PhotoBucket *2009 HarleyDavidson Sportster 883 Custom

02-28-2007, 11:45 PM	#25
matt rupke Got Boost? Join Date: Aug 06, 2005 Member Number: 11641 Location: Gibsonburg OH Name: matthew Age: 21 Sex: M Model Year: 1994 Car: toyota supra TT Engine: 3.0 I6 Twin Turbo	possibly, im gona try to see if i can mod it to fit with my turbo set up that will hopefully happen this summer. if not ill just sell it on here __________________ 94 Supra 6 speed Twin turbo: 496 RWHP 01 zx-12r = stupid fast 96 GAse 2.4 = winter beater

03-01-2007, 12:05 AM	#26
litdevil316 101st Parkinglot RANGER!! Join Date: May 03, 2003 Member Number: 1932 Location: hagerstownMD/fortcampbellKY Name: Nick Age: 27 Sex: M Model Year: 97 Car: pontiac Grand Am xSE Engine: 2.4L tc (+0.020over)	i'd be tempted to check into it. lol any idea how much? lol __________________ 1997 Grand Am SE Bloack Coupe 17"rims BFG gforceTAsKDWs -RSM 62TB w/ported mani;JBodyPerf p/p head,perf cams;header:BremboRotors-HawkHPS-pads -RSM front STB; B&G 1.6drop/KYBs-MagnaFlow muffler,2.5" exhaust, MSDcoil Cnvrsn 2005 GMC Canyon crewcab z71-4x4 3.5L I5 MY Cardomain My MySpace My PhotoBucket *2009 HarleyDavidson Sportster 883 Custom

03-01-2007, 12:08 AM	#27
litdevil316 101st Parkinglot RANGER!! Join Date: May 03, 2003 Member Number: 1932 Location: hagerstownMD/fortcampbellKY Name: Nick Age: 27 Sex: M Model Year: 97 Car: pontiac Grand Am xSE Engine: 2.4L tc (+0.020over)	matt, i saw on your cardomain your waiting to install the turbo and all, hows that going along? got pics of it if its already done? __________________ 1997 Grand Am SE Bloack Coupe 17"rims BFG gforceTAsKDWs -RSM 62TB w/ported mani;JBodyPerf p/p head,perf cams;header:BremboRotors-HawkHPS-pads -RSM front STB; B&G 1.6drop/KYBs-MagnaFlow muffler,2.5" exhaust, MSDcoil Cnvrsn 2005 GMC Canyon crewcab z71-4x4 3.5L I5 MY Cardomain My MySpace My PhotoBucket *2009 HarleyDavidson Sportster 883 Custom

03-01-2007, 08:03 AM	#31
litdevil316 101st Parkinglot RANGER!! Join Date: May 03, 2003 Member Number: 1932 Location: hagerstownMD/fortcampbellKY Name: Nick Age: 27 Sex: M Model Year: 97 Car: pontiac Grand Am xSE Engine: 2.4L tc (+0.020over)	100 probley wouldnt be too bad for it. ya say the site has it for 300.. damn that. lol. as far as your inter cooler, have you thought of a place to put it? i had been thinking that about my car since i was thinking about the RSM sc kit at first, that one could use the intercooler if you get the boost high enuff. thing is i dont really wanna cut up my bumber and i havent found a fit i like. but i have found a spot that could work and has the room, tho might need a lil mod'ing. right in front of the radiator. of course, thats with the AC condensor removed. i removed all my ac crap('cept whats in the dash) and it freed up alot of room in front of the radiator. heres a couple good pics of what i'm talking about... (more pics in my yahoo link) with out oilcooler.. and theres the oilcooler... __________________ 1997 Grand Am SE Bloack Coupe 17"rims BFG gforceTAsKDWs -RSM 62TB w/ported mani;JBodyPerf p/p head,perf cams;header:BremboRotors-HawkHPS-pads -RSM front STB; B&G 1.6drop/KYBs-MagnaFlow muffler,2.5" exhaust, MSDcoil Cnvrsn 2005 GMC Canyon crewcab z71-4x4 3.5L I5 MY Cardomain My MySpace My PhotoBucket 2009 HarleyDavidson Sportster 883 Custom Last edited by litdevil316; 03-01-2007 at 08:06 AM.*

03-01-2007, 10:04 AM	#33
litdevil316 101st Parkinglot RANGER!! Join Date: May 03, 2003 Member Number: 1932 Location: hagerstownMD/fortcampbellKY Name: Nick Age: 27 Sex: M Model Year: 97 Car: pontiac Grand Am xSE Engine: 2.4L tc (+0.020over)	__________________ 1997 Grand Am SE Bloack Coupe 17"rims BFG gforceTAsKDWs -RSM 62TB w/ported mani;JBodyPerf p/p head,perf cams;header:BremboRotors-HawkHPS-pads -RSM front STB; B&G 1.6drop/KYBs-MagnaFlow muffler,2.5" exhaust, MSDcoil Cnvrsn 2005 GMC Canyon crewcab z71-4x4 3.5L I5 MY Cardomain My MySpace My PhotoBucket *2009 HarleyDavidson Sportster 883 Custom

03-01-2007, 04:02 PM	#34
NYC ICE Think, Build, Enjoy. Join Date: Feb 11, 2007 Member Number: 19080 Location: NY Name: Ben Sex: M Model Year: 2001 Car: Pontiac Grand Am SE1 Engine: 2.4L	When you say sharp corners reduce HP, yes thats correct some things are unavoidable. Where all my connections of the tubes come together there is a gasget on the inside and its smoothed out so the air flow is not interupted. When I assembled the WAI I made sure of this and did one gasget at a time and built from one side to the other to insure I could make it as smooth as possible. For a custom build i would say its good enough for the price i spent on the parts. __________________ 1989 Ford Mustang 302 in LX trim. 1991 Ford Mustang LX 2.3 (For Sale) 1986 Merkur XR4Ti / Ford Sierra RS500 Project 2001 Pontiac Grand Am SE 2.4L Daily Driver

03-01-2007, 07:14 PM	#35
litdevil316 101st Parkinglot RANGER!! Join Date: May 03, 2003 Member Number: 1932 Location: hagerstownMD/fortcampbellKY Name: Nick Age: 27 Sex: M Model Year: 97 Car: pontiac Grand Am xSE Engine: 2.4L tc (+0.020over)	i'l sure agree with ya there Ben.jus take a look at jerry-rigged intake. lol. tho i'l be the first to admit the flex tube has to go. but if i do get the SC, it'll go anyway. __________________ 1997 Grand Am SE Bloack Coupe 17"rims BFG gforceTAsKDWs -RSM 62TB w/ported mani;JBodyPerf p/p head,perf cams;header:BremboRotors-HawkHPS-pads -RSM front STB; B&G 1.6drop/KYBs-MagnaFlow muffler,2.5" exhaust, MSDcoil Cnvrsn 2005 GMC Canyon crewcab z71-4x4 3.5L I5 MY Cardomain My MySpace My PhotoBucket *2009 HarleyDavidson Sportster 883 Custom

03-01-2007, 07:29 PM	#37
litdevil316 101st Parkinglot RANGER!! Join Date: May 03, 2003 Member Number: 1932 Location: hagerstownMD/fortcampbellKY Name: Nick Age: 27 Sex: M Model Year: 97 Car: pontiac Grand Am xSE Engine: 2.4L tc (+0.020over)	and to think i actually washed it yesterday.... __________________ 1997 Grand Am SE Bloack Coupe 17"rims BFG gforceTAsKDWs -RSM 62TB w/ported mani;JBodyPerf p/p head,perf cams;header:BremboRotors-HawkHPS-pads -RSM front STB; B&G 1.6drop/KYBs-MagnaFlow muffler,2.5" exhaust, MSDcoil Cnvrsn 2005 GMC Canyon crewcab z71-4x4 3.5L I5 MY Cardomain My MySpace My PhotoBucket *2009 HarleyDavidson Sportster 883 Custom

03-01-2007, 08:14 PM	#38
NYC ICE Think, Build, Enjoy. Join Date: Feb 11, 2007 Member Number: 19080 Location: NY Name: Ben Sex: M Model Year: 2001 Car: Pontiac Grand Am SE1 Engine: 2.4L	yeah, if you havent seen a 5speed 2.4 grand am done up nice its on street fire heres the link. http://videos.streetfire.net/search/...740061d46d.htm __________________ 1989 Ford Mustang 302 in LX trim. 1991 Ford Mustang LX 2.3 (For Sale) 1986 Merkur XR4Ti / Ford Sierra RS500 Project 2001 Pontiac Grand Am SE 2.4L Daily Driver

03-01-2007, 08:15 PM	#39
bballr4567 Booourns winter! Join Date: Sep 21, 2006 Member Number: 17082 Location: Evansville, IN Name: Josh Age: 26 Model Year: 2000 Car: Pontiac Firebird Formula Engine: 5.7 LS1	^ That car has been repainted and looks amazing now. Go to GAGT forums and check out the user spyhunter. __________________ *GAOTW Jan 8, 2007!!*

03-01-2007, 08:21 PM	#40
litdevil316 101st Parkinglot RANGER!! Join Date: May 03, 2003 Member Number: 1932 Location: hagerstownMD/fortcampbellKY Name: Nick Age: 27 Sex: M Model Year: 97 Car: pontiac Grand Am xSE Engine: 2.4L tc (+0.020over)	dayyyyyyum. lol. havent seen Spy in a while. does he ever use goac anymore? __________________ 1997 Grand Am SE Bloack Coupe 17"rims BFG gforceTAsKDWs -RSM 62TB w/ported mani;JBodyPerf p/p head,perf cams;header:BremboRotors-HawkHPS-pads -RSM front STB; B&G 1.6drop/KYBs-MagnaFlow muffler,2.5" exhaust, MSDcoil Cnvrsn 2005 GMC Canyon crewcab z71-4x4 3.5L I5 MY Cardomain My MySpace My PhotoBucket *2009 HarleyDavidson Sportster 883 Custom